Project Number Date
test_Tails_ISO_15451-support-manual-fsck-on-error 3 24 Jul 2024, 19:22

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 50 3 22 0 0 75 7 3 10 19:57.580 Failed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
27.141
Before features/support/hooks.rb:269 0.004
Given I have started Tails from DVD without network and logged in 8.922
And I temporarily create a 4 GiB disk named "gptfat" 0.085
And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.392
And I plug USB drive "gptfat" 2.406
When I start Tails Installer 9.286
Then I am told by Tails Installer that the destination device "is too small" 0.048
After features/support/hooks.rb:326 0.760
After features/support/hooks.rb:100 0.001
Tags: @product
22.355
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 9.511
And I temporarily create a 7200 MiB disk named "temp" 0.079
And I start Tails Installer 9.353
But a suitable USB device is not found 0.024
When I plug USB drive "temp" 3.038
Then the "temp" USB drive is selected 0.094
When I unplug USB drive "temp" 0.221
Then a suitable USB device is not found 0.031
After features/support/hooks.rb:326 0.850
After features/support/hooks.rb:100 0.000
Tags: @product
3:18.670
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 8.591
And I temporarily create a 7200 MiB disk named "install" 0.080
And I create a gpt partition with a vfat filesystem on disk "install" 6.634
And I plug USB drive "install" 2.639
And I install Tails to USB drive "install" by cloning 2:22.206
Then the running Tails is installed on USB drive "install" 31.821
And there is a random seed on USB drive "install" 6.606
But there is no persistence partition on USB drive "install" 0.091
After features/support/hooks.rb:326 1.272
After features/support/hooks.rb:100 0.096
Tags: @product
2:35.944
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 8.479
And I temporarily create a 7200 MiB disk named "install" 0.398
And I plug USB drive "install" 2.581
And I install Tails to USB drive "install" by cloning 2:2.635
Then the running Tails is installed on USB drive "install" 14.524
And there is a random seed on USB drive "install" 7.239
But there is no persistence partition on USB drive "install" 0.085
After features/support/hooks.rb:326 1.691
After features/support/hooks.rb:100 0.124
Tags: @product
2:12.728
Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:12.728
try_for() 
try_for() timeout expired
Last ignored exception was: Dogtail::Failure: The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with name="Unlock Encryption" roleName='push button'
STDOUT:

STDERR:


./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:335:in `initialize'
./features/support/helpers/dogtail.rb:264:in `new'
./features/support/helpers/dogtail.rb:264:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:272:in `child'
./features/step_definitions/usb.rb:685:in `block (2 levels) in <top (required)>'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/usb.rb:684:in `block in <top (required)>'
./features/step_definitions/usb.rb:708:in `block in <top (required)>'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `block (2 levels) in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:684:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:708:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:45:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I create a file in the Persistent directory 0.000
And I temporarily create a 7200 MiB disk named "install" 0.000
And I create a gpt partition with a vfat filesystem on disk "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails with Persistent Storage to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is a persistence partition on USB drive "install" 0.000
And the USB drive "install" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:326 6.804 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage' (at time 00:50:11)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:50:11_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:50:11_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:50:11_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:50:11_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Tags: @product
2:12.705
Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:12.705
try_for() 
try_for() timeout expired
Last ignored exception was: Dogtail::Failure: The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with name="Unlock Encryption" roleName='push button'
STDOUT:

STDERR:


./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:335:in `initialize'
./features/support/helpers/dogtail.rb:264:in `new'
./features/support/helpers/dogtail.rb:264:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:272:in `child'
./features/step_definitions/usb.rb:685:in `block (2 levels) in <top (required)>'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/usb.rb:684:in `block in <top (required)>'
./features/step_definitions/usb.rb:708:in `block in <top (required)>'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `block (2 levels) in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:684:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:708:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:57:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I temporarily create a 7200 MiB disk named "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:326 6.935 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage' (at time 00:52:31)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:52:31_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:52:31_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:52:31_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:52:31_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Tags: @product
2:9.828
Scenario Re-installing Tails over an existing USB installation with a persistent partition
Before features/support/hooks.rb:269 0.004
Steps
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.828
try_for() 
try_for() timeout expired
Last ignored exception was: Dogtail::Failure: The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with name="Unlock Encryption" roleName='push button'
STDOUT:

STDERR:


./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:335:in `initialize'
./features/support/helpers/dogtail.rb:264:in `new'
./features/support/helpers/dogtail.rb:264:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:272:in `child'
./features/step_definitions/usb.rb:685:in `block (2 levels) in <top (required)>'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/usb.rb:684:in `block in <top (required)>'
./features/step_definitions/usb.rb:708:in `block in <top (required)>'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `block (2 levels) in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:684:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:708:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:70:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I have started Tails from DVD without network and logged in 0.000
And I clone USB drive "__internal" to a temporary USB drive "install" 0.000
And I plug USB drive "install" 0.000
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:326 6.838 
SCENARIO FAILED: 'Re-installing Tails over an existing USB installation with a persistent partition' (at time 00:54:48)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:54:48_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:54:48_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:54:48_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/3/artifact/build-artifacts/00:54:48_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.journal
After features/support/hooks.rb:100 0.000
Tags: @product @uefi
2:7.351
Before features/support/hooks.rb:269 0.003
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.239
And I power off the computer 0.335
And the computer is set to boot in UEFI mode 0.030
When I start Tails from USB drive "__internal" with network unplugged and I login 1:50.421
Then Tails is running from USB drive "__internal" 0.359
And the boot device has safe access rights 2.909
And Tails has started in UEFI mode 0.056
After features/support/hooks.rb:326 2.453
After features/support/hooks.rb:100 0.006
Tags: @product
2:50.685
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 9.263
And I plug and mount a USB drive containing a Tails USB image 52.174
And I create a 7200 MiB disk named "usbimage" 0.164
And I plug USB drive "usbimage" 2.454
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:46.630
After features/support/hooks.rb:326 3.539
After features/support/hooks.rb:100 0.098
Tags: @product
1:40.169
Before features/support/hooks.rb:269 0.003
Given a computer 0.298
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:38.355
Then Tails is running from USB drive "usbimage" 0.411
And the label of the system partition on "usbimage" is "Tails" 0.360
And the system partition on "usbimage" is an EFI system partition 0.249
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.142
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.118
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.128
And the system partition on "usbimage" has the expected flags 0.103
After features/support/hooks.rb:326 1.374
After features/support/hooks.rb:100 0.006