Project Number Date
test_Tails_ISO_15451-support-manual-fsck-on-error 47 27 Aug 2024, 14:24

Failures Overview

The following summary displays scenarios that failed.

Feature: System memory erasure on shutdown
Tags: @product @slow @not_release_blocker
7:14.216
Scenario Erasure of read and write disk caches of persistent data on shutdown
Before features/support/hooks.rb:269 0.002
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 7:14.216
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/erase_memory.feature:75:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I prepare Tails for memory erasure tests 0.000
When I fill a 128 MiB file with a known pattern on the persistent filesystem 0.000
When I trigger shutdown 0.000
Then I find very few patterns in the guest's memory after 20 seconds 0.000
After features/support/hooks.rb:326 5.181 
SCENARIO FAILED: 'Erasure of read and write disk caches of persistent data on shutdown' (at time 00:38:59)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:38:59_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:38:59_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:38:59_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:38:59_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.journal
After features/support/hooks.rb:100 0.011
Feature: Installing Tails to a USB drive
Tags: @product
2:10.302
Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage
Before features/support/hooks.rb:269 0.002
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.302
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:45:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I create a file in the Persistent directory 0.000
And I temporarily create a 7200 MiB disk named "install" 0.000
And I create a gpt partition with a vfat filesystem on disk "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails with Persistent Storage to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is a persistence partition on USB drive "install" 0.000
And the USB drive "install" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:326 5.213 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage' (at time 00:47:05)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:47:05_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:47:05_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:47:05_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:47:05_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Feature: Installing Tails to a USB drive
Tags: @product
2:9.620
Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage
Before features/support/hooks.rb:269 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.620
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:57:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I temporarily create a 7200 MiB disk named "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:326 5.189 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage' (at time 00:49:20)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:49:20_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:49:20_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:49:20_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:49:20_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Feature: Installing Tails to a USB drive
Tags: @product
2:10.819
Scenario Re-installing Tails over an existing USB installation with a persistent partition
Before features/support/hooks.rb:269 0.002
Steps
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.819
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:70:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I have started Tails from DVD without network and logged in 0.000
And I clone USB drive "__internal" to a temporary USB drive "install" 0.000
And I plug USB drive "install" 0.000
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:326 5.334 
SCENARIO FAILED: 'Re-installing Tails over an existing USB installation with a persistent partition' (at time 00:51:36)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:51:36_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:51:36_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:51:36_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/00:51:36_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.journal
After features/support/hooks.rb:100 0.000
Feature: Additional software
Tags: @product @check_tor_leaks @slow
5:54.469
Scenario I set up Additional Software when installing a package without persistent partition and the package is installed next time I start Tails
Before features/support/hooks.rb:269 0.002
Before features/support/hooks.rb:507 0.003
Steps
Given I start Tails from a freshly installed USB drive with an administration password and the network is plugged and I login 1:27.152
And I update APT using apt 18.236
And I install "popularity-contest" using apt 22.455
Then I am proposed to add the "popularity-contest" package to my Additional Software 11.436
When I create a persistent storage and activate the Additional Software feature 22.034
Then Additional Software is correctly configured for package "popularity-contest" 1.363
When I shutdown Tails and wait for the computer to power off 12.682
And I start Tails from USB drive "__internal" with network unplugged 58.770
And I enable persistence 2:0.337
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/additional_software_packages.feature:36:in `And I enable persistence'
And I log in to a new session 0.000
And the Additional Software installation service has started 0.000
Then I am notified that the installation succeeded 0.000
And Additional Software is correctly configured for package "popularity-contest" 0.000
And the package "popularity-contest" is installed after Additional Software has been started 0.000
After features/support/hooks.rb:515 0.044
After features/support/hooks.rb:326 5.398 
SCENARIO FAILED: 'I set up Additional Software when installing a package without persistent partition and the package is installed next time I start Tails' (at time 01:08:29)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:08:29_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:08:29_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:08:29_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:08:29_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:08:29_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:08:29_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:08:29_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:08:29_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.journal
After features/support/hooks.rb:100 0.011
Feature: Additional software
Tags: @product @check_tor_leaks @slow
2:59.090
Scenario My Additional Software list is configurable through a GUI or through notifications when I install or remove packages with APT or Synaptic
Before features/support/hooks.rb:269 0.006
Before features/support/hooks.rb:507 0.006
Steps
Given a computer 0.251
And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password 2:58.838
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:294:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/additional_software_packages.feature:55:in `And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password'
When I uninstall "popularity-contest" using apt 0.000
And I accept removing "popularity-contest" from Additional Software 0.000
Then "popularity-contest" is not in the list of Additional Software 0.000
When I start Synaptic 0.000
And I update APT using Synaptic 0.000
And I install "cowsay" using Synaptic 0.000
And I accept adding "cowsay" to Additional Software 0.000
Then Additional Software is correctly configured for package "cowsay" 0.000
When I uninstall "cowsay" using apt 0.000
And I refuse removing "cowsay" from Additional Software 0.000
Then Additional Software is correctly configured for package "cowsay" 0.000
When I start "Additional Software" via GNOME Activities Overview 0.000
And I remove "cowsay" from the list of Additional Software using Additional Software GUI 0.000
Then "cowsay" is not in the list of Additional Software 0.000
When I install "cowsay" using apt 0.000
And I refuse adding "cowsay" to Additional Software 0.000
Then "cowsay" is not in the list of Additional Software 0.000
After features/support/hooks.rb:515 0.029
After features/support/hooks.rb:326 5.206 
SCENARIO FAILED: 'My Additional Software list is configurable through a GUI or through notifications when I install or remove packages with APT or Synaptic' (at time 01:14:39)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:14:39_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:14:39_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:14:39_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:14:39_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:14:39_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:14:39_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:14:39_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:14:39_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.journal
After features/support/hooks.rb:100 0.008
Feature: Additional software
Tags: @product @check_tor_leaks @slow @not_release_blocker
2:59.446
Scenario Recovering in offline mode after Additional Software previously failed to upgrade and then succeed to upgrade when online
Before features/support/hooks.rb:269 0.005
Before features/support/hooks.rb:507 0.004
Steps
Given a computer 0.195
And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password 2:59.250
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:294:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/additional_software_packages.feature:79:in `And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password'
And I configure APT to prefer an old version of cowsay 0.000
When I install an old version "3.03+dfsg2-1" of the cowsay package using apt 0.000
And I accept adding "cowsay" to Additional Software 0.000
And Additional Software is correctly configured for package "cowsay" 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
# We need to add back this custom APT source for the Additional Software
# install step, as it was not saved in persistence
And I configure APT to prefer an old version of cowsay 0.000
And I log in to a new session 0.000
And the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started 0.000
And I revert the APT tweaks that made it prefer an old version of cowsay 0.000
# We remove the newest package after it has been downloaded and before
# it is installed, so that the upgrade process fails
And I prepare the Additional Software upgrade process to fail 0.000
And the network is plugged 0.000
And Tor is ready 0.000
# Note: the next step races against the appearance of the "The
# upgrade of your additional software failed" notification.
# It should win most of the time, which is good, but there's no
# guarantee it does. If it loses, then it'll remove the notification
# we'll be trying to interact with below ("I can open…")
And all notifications have disappeared 0.000
And available upgrades have been checked 0.000
And I see the "The upgrade of your additional software failed" notification after at most 300 seconds 0.000
And I can open the Additional Software configuration window from the notification 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
# We need to add back this custom APT source for the Additional Software
# install step, as it was not saved in persistence
And I configure APT to prefer an old version of cowsay 0.000
And I log in to a new session 0.000
And the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started 0.000
And I revert the APT tweaks that made it prefer an old version of cowsay 0.000
And the network is plugged 0.000
And Tor is ready 0.000
Then the Additional Software upgrade service has started 0.000
And the installed version of package "cowsay" is newer than "3.03+dfsg2-1" 0.000
After features/support/hooks.rb:515 0.042
After features/support/hooks.rb:326 5.264 
SCENARIO FAILED: 'Recovering in offline mode after Additional Software previously failed to upgrade and then succeed to upgrade when online' (at time 01:17:44)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:17:44_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:17:44_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:17:44_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:17:44_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:17:44_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:17:44_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:17:44_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:17:44_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.journal
After features/support/hooks.rb:100 0.009
Feature: Additional software
Tags: @product @check_tor_leaks @slow @not_release_blocker_inherited
2:58.740
Scenario I am notified when Additional Software fails to install a package
Before features/support/hooks.rb:269 0.005
Before features/support/hooks.rb:507 0.005
Steps
Given a computer 0.197
And I start Tails from USB drive "__internal" with network unplugged 58.196
And I enable persistence 2:0.346
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/additional_software_packages.feature:126:in `And I enable persistence'
And I remove the "cowsay" deb files from the APT cache 0.000
# Prevent the "Warning: virtual machine detected!" notification from racing
# with the one we'll be interacting with below.
And I disable the tails-virt-notify-user.service user unit 0.000
And I log in to a new session 0.000
Then I see the "The installation of your additional software failed" notification after at most 300 seconds 0.000
And I can open the Additional Software log file from the notification 0.000
And the package "cowsay" is not installed 0.000
After features/support/hooks.rb:515 0.043
After features/support/hooks.rb:326 5.461 
SCENARIO FAILED: 'I am notified when Additional Software fails to install a package' (at time 01:20:48)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:20:48_I_am_notified_when_Additional_Software_fails_to_install_a_package.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:20:48_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:20:48_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:20:48_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:20:48_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:20:48_I_am_notified_when_Additional_Software_fails_to_install_a_package.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:20:48_I_am_notified_when_Additional_Software_fails_to_install_a_package.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:20:48_I_am_notified_when_Additional_Software_fails_to_install_a_package.journal
After features/support/hooks.rb:100 0.015
Feature: Upgrading an old Tails USB installation
Tags: @product
3:1.091
Scenario Booting Tails from a USB drive upgraded from USB with persistence enabled
Before features/support/hooks.rb:269 0.006
Steps
Given a computer 0.212
And I start Tails from USB drive "to_upgrade" with network unplugged and I login with persistence enabled 3:0.879
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:294:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_upgrade.feature:73:in `And I start Tails from USB drive "to_upgrade" with network unplugged and I login with persistence enabled'
Then all tps features from the old Tails version are active 0.000
And Tails is running from USB drive "to_upgrade" 0.000
And the boot device has safe access rights 0.000
And the expected persistent files created with the old Tails version are present in the filesystem 0.000
And all persistent directories from the old Tails version have safe access rights 0.000
After features/support/hooks.rb:326 5.328 
SCENARIO FAILED: 'Booting Tails from a USB drive upgraded from USB with persistence enabled' (at time 01:35:17)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:35:17_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:35:17_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:35:17_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:35:17_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.journal
After features/support/hooks.rb:100 0.009
Feature: Upgrading an old Tails USB installation
Tags: @product @automatic_upgrade
2:16.626
Scenario Upgrading an initial Tails installation with an incremental upgrade
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:16.626
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_upgrade.feature:82:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And no SquashFS delta is installed 0.000
And Tails is fooled to think that version 6.0~testoverlayfs was initially installed 0.000
And Tails is fooled to think it is running version 6.0~testoverlayfs 0.000
And the file system changes introduced in version 6.2~testoverlayfs are not present 0.000
And the file system changes introduced in version 6.3~testoverlayfs are not present 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.2~testoverlayfs 0.000
And I can successfully install the incremental upgrade to version 6.2~testoverlayfs 0.000
Given I shutdown Tails and wait for the computer to power off 0.000
When I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then Tails is running version 6.2~testoverlayfs 0.000
And all tps features are active 0.000
And the file system changes introduced in version 6.2~testoverlayfs are present 0.000
And only the 6.2~testoverlayfs SquashFS delta is installed 0.000
# Our IUK sets a release date that can make Tor bootstrapping impossible
Given Tails system time is magically synchronized 0.000
# We'll really install Tails_amd64_6.0~testoverlayfs_to_6.3~testoverlayfs.iuk
# but we need some way to force upgrading a second time in a row
# even if only the initially installed version is considered
And Tails is fooled to think that version 6.1~testoverlayfs was initially installed 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.3~testoverlayfs 0.000
And I can successfully install the incremental upgrade to version 6.3~testoverlayfs 0.000
Given I shutdown Tails and wait for the computer to power off 0.000
When I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then Tails is running version 6.3~testoverlayfs 0.000
And all tps features are active 0.000
And the file system changes introduced in version 6.3~testoverlayfs are present 0.000
And only the 6.3~testoverlayfs SquashFS delta is installed 0.000
# Regression test for #17425 (i.e. the Upgrader would propose
# upgrading to the version that's already running)
Given Tails system time is magically synchronized 0.000
And Tails is fooled to think that version 6.1~testoverlayfs was initially installed 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then the Upgrader considers the system as up-to-date 0.000
# Regression test on #8158 (i.e. the IUK's filesystem is not part of the Unsafe Browser's chroot)
And I successfully start the Unsafe Browser 0.000
And the file system changes introduced in version 6.3~testoverlayfs are present in the Unsafe Browser's chroot 0.000
After features/support/hooks.rb:326 5.378 
SCENARIO FAILED: 'Upgrading an initial Tails installation with an incremental upgrade' (at time 01:37:39)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:37:39_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:37:39_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:37:39_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:37:39_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.journal
After features/support/hooks.rb:100 0.000
Feature: Upgrading an old Tails USB installation
Tags: @product @automatic_upgrade
2:10.566
Scenario Upgrading a Tails whose signing key is outdated
Before features/support/hooks.rb:269 0.011
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.566
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_upgrade.feature:127:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And Tails is fooled to think that version 6.0~testoverlayfs was initially installed 0.000
And Tails is fooled to think it is running version 6.0~testoverlayfs 0.000
And the signing key used by the Upgrader is outdated 0.000
But a current signing key is available on our website 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.2~testoverlayfs 0.000
After features/support/hooks.rb:326 5.069 
SCENARIO FAILED: 'Upgrading a Tails whose signing key is outdated' (at time 01:39:55)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:39:55_Upgrading_a_Tails_whose_signing_key_is_outdated.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:39:55_Upgrading_a_Tails_whose_signing_key_is_outdated.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:39:55_Upgrading_a_Tails_whose_signing_key_is_outdated.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:39:55_Upgrading_a_Tails_whose_signing_key_is_outdated.journal
After features/support/hooks.rb:100 0.000
Feature: Emergency shutdown
Tags: @product @not_release_blocker
2:10.739
Scenario Tails erases memory and shuts down on USB boot medium removal: persistent data
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.739
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/emergency_shutdown.feature:48:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I prepare Tails for memory erasure tests 0.000
And I fill a 128 MiB file with a known pattern on the persistent filesystem 0.000
And patterns cover at least 100 MiB in the guest's memory 0.000
When I eject the boot medium 0.000
And I wait for Tails to finish wiping the memory 0.000
Then I find very few patterns in the guest's memory 0.000
And Tails eventually shuts down 0.000
After features/support/hooks.rb:326 5.296 
SCENARIO FAILED: 'Tails erases memory and shuts down on USB boot medium removal: persistent data' (at time 01:45:57)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:45:57_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:45:57_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:45:57_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:45:57_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.journal
After features/support/hooks.rb:100 0.000
Feature: Backing up the persistent storage
Tags: @product
2:11.001
Scenario Using Tails' custom backup tool to backup a newly added file
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:11.001
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/backup.feature:8:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# The volume cannot be in use when GuestFs clones it, which we do below
And I shutdown Tails and wait for the computer to power off 0.000
And I clone USB drive "__internal" to a temporary USB drive "backup" 0.000
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 0.000
And I write a file "/live/persistence/TailsData_unlocked/new" with contents "foo" 0.000
When I start Tails' custom backup tool 0.000
Then the backup tool displays "Plug in your backup Tails USB stick" 0.000
When I plug USB drive "backup" 0.000
And I give the Persistent Storage on drive "backup" its own UUID 0.000
And I click "Retry" in the backup tool 0.000
Then the backup tool displays "Do you want to back up your Persistent Storage now?" 0.000
When I click "Back Up" in the backup tool 0.000
And I enter my persistent storage passphrase into the polkit prompt 0.000
Then the backup tool displays "Your Persistent Storage was backed up successfully to your backup Tails USB stick!" 0.000
# The backup tool ejects the drive, so we have to replug it
When I unplug USB drive "backup" 0.000
And I plug USB drive "backup" 0.000
Then the USB drive "backup" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:326 5.389 
SCENARIO FAILED: 'Using Tails' custom backup tool to backup a newly added file' (at time 01:49:16)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:49:16_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:49:16_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:49:16_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:49:16_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.journal
After features/support/hooks.rb:100 0.000
Feature: Using Evince
Tags: @product
2:9.555
Scenario I can view and print a PDF file stored in persistent /home/amnesia/Persistent
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.555
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/evince.feature:45:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I copy "/usr/share/cups/data/default-testpage.pdf" to "/home/amnesia/Persistent" as user "amnesia" 0.000
Then the file "/home/amnesia/Persistent/default-testpage.pdf" exists 0.000
When I open "/home/amnesia/Persistent/default-testpage.pdf" with Evince 0.000
Then I see "CupsTestPage.png" after at most 40 seconds 0.000
And I can print the current document to "/home/amnesia/Persistent/output.pdf" 0.000
After features/support/hooks.rb:326 5.490 
SCENARIO FAILED: 'I can view and print a PDF file stored in persistent /home/amnesia/Persistent' (at time 01:56:09)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:56:09_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:56:09_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:56:09_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:56:09_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.journal
After features/support/hooks.rb:100 0.000
Feature: Using Evince
Tags: @product @not_release_blocker
2:9.825
Scenario I cannot view a PDF file stored in persistent /home/amnesia/.gnupg
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.825
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/evince.feature:54:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I copy "/usr/share/cups/data/default-testpage.pdf" to "/home/amnesia/.gnupg" as user "amnesia" 0.000
Then the file "/home/amnesia/.gnupg/default-testpage.pdf" exists 0.000
Given I start monitoring the AppArmor log of "/usr/bin/evince" 0.000
And I try to open "/home/amnesia/.gnupg/default-testpage.pdf" with Evince 0.000
Then Evince tells me it cannot open "/home/amnesia/.gnupg/default-testpage.pdf" 0.000
And AppArmor has denied "/usr/bin/evince" from opening "/home/amnesia/.gnupg/default-testpage.pdf" 0.000
After features/support/hooks.rb:326 5.324 
SCENARIO FAILED: 'I cannot view a PDF file stored in persistent /home/amnesia/.gnupg' (at time 01:58:25)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:58:25_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:58:25_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:58:25_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/01:58:25_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.journal
After features/support/hooks.rb:100 0.000
Feature: GNOME is well-integrated into Tails
Tags: @product
2:10.599
Scenario I can launch various apps via GNOME Activities Overview
Before features/support/hooks.rb:269 0.004
Steps
# Some apps (Electrum and Persistent Storage Backup) only start when
# a Persistent Storage is available.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.599
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/gnome.feature:22:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# Some apps (Tor Browser) only start when the network is plugged.
And the network is plugged 0.000
And Tor is ready 0.000
And all notifications have disappeared 0.000
When I start "Additional Software" via GNOME Activities Overview 0.000
And I close the "tails-additional-software-config" window 0.000
When I start "Disks" via GNOME Activities Overview 0.000
# The close button of GNOME Disks is not accessible
And I close the "gnome-disks" window via Alt+F4 0.000
When I start "GNOME Terminal" via GNOME Activities Overview 0.000
And I close the "gnome-terminal-server" window 0.000
When I start "Files" via GNOME Activities Overview 0.000
And I close the "org.gnome.Nautilus" window 0.000
When I start "Persistent Storage" via GNOME Activities Overview 0.000
And I close the "tps-frontend" window 0.000
When I start "Persistent Storage Backup" via GNOME Activities Overview 0.000
And I close the "zenity" window 0.000
When I start "Pidgin" via GNOME Activities Overview 0.000
And I close the "Pidgin" window via Alt+F4 0.000
When I start "Thunderbird" via GNOME Activities Overview 0.000
And I close the "Thunderbird" window 0.000
When I start "Tor Browser" via GNOME Activities Overview 0.000
And I close the "Firefox" window 0.000
When I start "Unlock VeraCrypt Volumes" via GNOME Activities Overview 0.000
And I close the "unlock-veracrypt-volumes" window 0.000
When I start "Unsafe Browser" via GNOME Activities Overview 0.000
And I close the "Firefox" window 0.000
After features/support/hooks.rb:326 5.007 
SCENARIO FAILED: 'I can launch various apps via GNOME Activities Overview' (at time 02:01:12)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:01:12_I_can_launch_various_apps_via_GNOME_Activities_Overview.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:01:12_I_can_launch_various_apps_via_GNOME_Activities_Overview.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:01:12_I_can_launch_various_apps_via_GNOME_Activities_Overview.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:01:12_I_can_launch_various_apps_via_GNOME_Activities_Overview.journal
After features/support/hooks.rb:100 0.000
Feature: Hardware failures
Tags: @product @doc
2:9.926
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:269 0.006
Steps
Given a computer 0.233
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.692
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:27:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:21:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the SquashFS 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:326 6.034 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#1)' (at time 02:05:38)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:05:38_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:05:38_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:05:38_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:05:38_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.journal
After features/support/hooks.rb:100 0.000
Feature: Hardware failures
Tags: @product @doc
2:10.689
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:269 0.008
Steps
Given a computer 0.277
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.412
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:28:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:21:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the boot device 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:326 5.206 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#2)' (at time 02:07:54)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:07:54_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:07:54_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:07:54_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:07:54_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.journal
After features/support/hooks.rb:100 0.000
Feature: Hardware failures
Tags: @product @doc
2:9.964
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:269 0.005
Steps
Given a computer 0.195
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.768
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:29:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:21:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the boot device with a target error 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:326 5.236 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#3)' (at time 02:10:09)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:10:09_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:10:09_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:10:09_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:10:09_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
3:56.415
Scenario Creating a Persistent Storage
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive without a persistent partition and logged in 12.818
Then Tails is running from USB drive "__internal" 0.426
When I create a file in the Persistent directory 0.130
And I create a persistent partition with the default settings 26.833
Then the file I created was copied to the Persistent Storage 0.668
When I shutdown Tails and wait for the computer to power off 13.352
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 3:2.185
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:294:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/persistence.feature:26:in `And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled'
Then persistence for "Persistent" is active 0.000
And the file I created in the Persistent directory exists 0.000
After features/support/hooks.rb:326 5.034 
SCENARIO FAILED: 'Creating a Persistent Storage' (at time 02:58:40)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:58:40_Creating_a_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:58:40_Creating_a_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:58:40_Creating_a_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/02:58:40_Creating_a_Persistent_Storage.journal
After features/support/hooks.rb:100 0.011
Feature: Tails persistence
Tags: @product
2:12.710
Scenario Booting Tails from a USB drive with an enabled persistent partition and reconfiguring it
Before features/support/hooks.rb:269 0.008
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:12.710
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:42:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then Tails is running from USB drive "__internal" 0.000
And all tps features are active 0.000
And all persistent directories have safe access rights 0.000
When I disable the first tps feature 0.000
Then all tps features but the first one are active 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then all tps features but the first one are active 0.000
After features/support/hooks.rb:326 5.495 
SCENARIO FAILED: 'Booting Tails from a USB drive with an enabled persistent partition and reconfiguring it' (at time 03:02:05)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:02:05_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:02:05_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:02:05_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:02:05_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.697
Scenario Activating and deactivating Persistent Storage features
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.697
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:53:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then persistence for "Persistent" is active 0.000
And I create a file in the Persistent directory 0.000
Then the file I created was copied to the Persistent Storage 0.000
When I disable the first tps feature 0.000
Then persistence for "Persistent" is not active 0.000
And the Persistent directory does not exist 0.000
When I enable the first tps feature 0.000
Then persistence for "Persistent" is active 0.000
And the file I created in the Persistent directory exists 0.000
After features/support/hooks.rb:326 5.411 
SCENARIO FAILED: 'Activating and deactivating Persistent Storage features' (at time 03:04:20)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:04:20_Activating_and_deactivating_Persistent_Storage_features.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:04:20_Activating_and_deactivating_Persistent_Storage_features.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:04:20_Activating_and_deactivating_Persistent_Storage_features.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:04:20_Activating_and_deactivating_Persistent_Storage_features.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.454
Scenario Deleting data of a Persistent Storage feature
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.454
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:65:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then persistence for "Persistent" is active 0.000
When I create a file in the Persistent directory 0.000
And I disable the first tps feature 0.000
And I delete the data of the Persistent Folder feature 0.000
Then the file I created does not exist on the Persistent Storage 0.000
After features/support/hooks.rb:326 5.219 
SCENARIO FAILED: 'Deleting data of a Persistent Storage feature' (at time 03:06:35)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:06:35_Deleting_data_of_a_Persistent_Storage_feature.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:06:35_Deleting_data_of_a_Persistent_Storage_feature.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:06:35_Deleting_data_of_a_Persistent_Storage_feature.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:06:35_Deleting_data_of_a_Persistent_Storage_feature.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.399
Scenario Writing files to a read/write-enabled persistent partition
Before features/support/hooks.rb:269 0.007
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.399
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:73:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And Tor is ready 0.000
And I take note of which tps features are available 0.000
When I write some files expected to persist 0.000
And I shutdown Tails and wait for the computer to power off 0.000
# XXX: The next step succeeds (and the --debug output confirms that it's actually looking for the files) but will fail in a subsequent scenario restoring the same snapshot. This exactly what we want, but why does it work? What is guestfs's behaviour when qcow2 internal snapshots are involved?
Then only the expected files are present on the persistence partition on USB drive "__internal" 0.000
After features/support/hooks.rb:326 5.138 
SCENARIO FAILED: 'Writing files to a read/write-enabled persistent partition' (at time 03:08:50)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:08:50_Writing_files_to_a_read_write-enabled_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:08:50_Writing_files_to_a_read_write-enabled_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:08:50_Writing_files_to_a_read_write-enabled_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:08:50_Writing_files_to_a_read_write-enabled_persistent_partition.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:8.889
Scenario Creating and using a persistent NetworkManager connection
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:8.889
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:83:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And Tor is ready 0.000
And I add a wired DHCP NetworkManager connection called "persistent-con-current" 0.000
And I shutdown Tails and wait for the computer to power off 0.000
Given I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
And I capture all network traffic 0.000
And the network is plugged 0.000
And Tor is ready 0.000
And I switch to the "persistent-con-current" NetworkManager connection 0.000
And the 1st network device has a spoofed MAC address configured 0.000
And no network device leaked the real MAC address 0.000
After features/support/hooks.rb:326 5.226 
SCENARIO FAILED: 'Creating and using a persistent NetworkManager connection' (at time 03:11:04)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:11:04_Creating_and_using_a_persistent_NetworkManager_connection.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:11:04_Creating_and_using_a_persistent_NetworkManager_connection.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:11:04_Creating_and_using_a_persistent_NetworkManager_connection.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:11:04_Creating_and_using_a_persistent_NetworkManager_connection.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.855
Scenario Persistent Greeter options
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 9.465
When I enable persistence 2:0.390
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistence.feature:104:in `When I enable persistence'
Then no persistent Greeter options were restored 0.000
When I set all Greeter options to non-default values 0.000
And I log in to a new session in German (de) after having activated the Persistent Storage 0.000
Then all Greeter options are set to non-default values 0.000
When I cold reboot the computer 0.000
And the computer reboots Tails 0.000
Given I enable persistence 0.000
Then persistent Greeter options were restored 0.000
When I log in to a new session after having activated the Persistent Storage 0.000
Then all Greeter options are set to non-default values 0.000
After features/support/hooks.rb:326 5.110 
SCENARIO FAILED: 'Persistent Greeter options' (at time 03:14:21)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:14:21_Persistent_Greeter_options.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:14:21_Persistent_Greeter_options.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:14:21_Persistent_Greeter_options.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:14:21_Persistent_Greeter_options.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.535
Scenario Changing the Persistent Storage passphrase
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.535
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:117:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# Note that if anything fails after the passphrase was changed and
# before it's changed back below, subsequent scenarios might fail
# because the Persistent Storage doesn't have the expected passphrase.
When I change the passphrase of the Persistent Storage 0.000
And I shutdown Tails and wait for the computer to power off 0.000
Then I start Tails from USB drive "__internal" with network unplugged and I login with the changed persistence passphrase 0.000
And I change the passphrase of the Persistent Storage back to the original 0.000
After features/support/hooks.rb:326 5.648 
SCENARIO FAILED: 'Changing the Persistent Storage passphrase' (at time 03:16:35)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:16:35_Changing_the_Persistent_Storage_passphrase.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:16:35_Changing_the_Persistent_Storage_passphrase.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:16:35_Changing_the_Persistent_Storage_passphrase.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:16:35_Changing_the_Persistent_Storage_passphrase.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.758
Scenario Dotfiles persistence
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.758
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:136:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When I write some dotfile expected to persist 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then the expected persistent dotfile is present in the filesystem 0.000
After features/support/hooks.rb:326 5.026 
SCENARIO FAILED: 'Dotfiles persistence' (at time 03:19:44)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:19:44_Dotfiles_persistence.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:19:44_Dotfiles_persistence.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:19:44_Dotfiles_persistence.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:19:44_Dotfiles_persistence.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
1:9.007
Scenario Feature activation fails
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 8.646
And I create a symlink "/home/amnesia/Persistent" to "/etc" 0.085
When I try to enable persistence 0.274
Then the Welcome Screen tells me that the Persistent Folder feature couldn't be activated 1:0.001
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:1725:in `/^the Welcome Screen tells me that the Persistent Folder feature couldn't be activated$/'
features/persistence.feature:146:in `Then the Welcome Screen tells me that the Persistent Folder feature couldn't be activated'
When I log in to a new session after having activated the Persistent Storage 0.000
And all notifications have disappeared 0.000
Then the Persistent Storage settings tell me that the Persistent Folder feature couldn't be activated 0.000
And all tps features are enabled 0.000
And all tps features but the first one are active 0.000
After features/support/hooks.rb:326 9.157 
SCENARIO FAILED: 'Feature activation fails' (at time 03:20:58)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:20:58_Feature_activation_fails.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:20:58_Feature_activation_fails.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:20:58_Feature_activation_fails.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
5:39.290
Scenario LUKS header is automatically upgraded when unlocking the Persistent Storage
Before features/support/hooks.rb:269 0.012
Steps
Given I have started Tails without network from a USB drive with a LUKS 1 persistent partition and stopped at Tails Greeter's login screen 3:37.750
And I enable persistence 2:1.540
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistence.feature:155:in `And I enable persistence'
And I log in to a new session after having activated the Persistent Storage 0.000
Then a Tails persistence partition with LUKS version 2 and argon2id exists on USB drive "__internal" 0.000
And persistence is enabled 0.000
After features/support/hooks.rb:326 5.056 
SCENARIO FAILED: 'LUKS header is automatically upgraded when unlocking the Persistent Storage' (at time 03:26:46)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:26:46_LUKS_header_is_automatically_upgraded_when_unlocking_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:26:46_LUKS_header_is_automatically_upgraded_when_unlocking_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:26:46_LUKS_header_is_automatically_upgraded_when_unlocking_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:26:46_LUKS_header_is_automatically_upgraded_when_unlocking_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:10.754
Scenario LUKS backup header is restored if something goes wrong during upgrade
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a LUKS 1 persistent partition and stopped at Tails Greeter's login screen 8.963
And I enable persistence but something goes wrong during the LUKS header upgrade 2:1.791
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/usb.rb:712:in `/^I enable persistence but something goes wrong during the LUKS header upgrade$/'
features/persistence.feature:162:in `And I enable persistence but something goes wrong during the LUKS header upgrade'
Then the Tails persistence partition on USB drive "__internal" still has LUKS version 1 0.000
After features/support/hooks.rb:326 5.011 
SCENARIO FAILED: 'LUKS backup header is restored if something goes wrong during upgrade' (at time 03:29:02)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:29:02_LUKS_backup_header_is_restored_if_something_goes_wrong_during_upgrade.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:29:02_LUKS_backup_header_is_restored_if_something_goes_wrong_during_upgrade.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:29:02_LUKS_backup_header_is_restored_if_something_goes_wrong_during_upgrade.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:29:02_LUKS_backup_header_is_restored_if_something_goes_wrong_during_upgrade.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:17.940
Scenario Automatic filesystem repair
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 10.832
And I corrupt the Persistent Storage filesystem on USB drive "__internal" 6.460
When I enable persistence 2:0.647
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistence.feature:168:in `When I enable persistence'
Then the filesystem of the Persistent Storage was repaired 0.000
And persistence is successfully enabled 0.000
After features/support/hooks.rb:326 5.354 
SCENARIO FAILED: 'Automatic filesystem repair' (at time 03:31:25)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:31:25_Automatic_filesystem_repair.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:31:25_Automatic_filesystem_repair.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:31:25_Automatic_filesystem_repair.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:31:25_Automatic_filesystem_repair.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
1:17.220
Scenario Manual filesystem repair
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 9.621
And I corrupt the Persistent Storage filesystem on USB drive "__internal" in a way which can't be automatically repaired 7.204
When I try to enable persistence 0.393
Then the Welcome Screen tells me that filesystem errors were found on the Persistent Storage 1:0.001
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:1733:in `/^the Welcome Screen tells me that filesystem errors were found on the Persistent Storage$/'
features/persistence.feature:176:in `Then the Welcome Screen tells me that filesystem errors were found on the Persistent Storage'
When I repair the filesystem of the Persistent Storage 0.000
Then the Welcome Screen tells me that the filesystem was repaired successfully 0.000
And the filesystem of the Persistent Storage was repaired 0.000
When I close the filesystem repair dialog 0.000
Then persistence is successfully enabled 0.000
After features/support/hooks.rb:326 5.233 
SCENARIO FAILED: 'Manual filesystem repair' (at time 03:32:48)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:32:48_Manual_filesystem_repair.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:32:48_Manual_filesystem_repair.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:32:48_Manual_filesystem_repair.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:32:48_Manual_filesystem_repair.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
1:16.387
Scenario Filesystem and I/O errors
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 8.813
And I corrupt the Persistent Storage filesystem on USB drive "__internal" in a way which can't be automatically repaired 5.564
And Tails detects disk read failures on the boot device 1.613
When I try to enable persistence 0.393
Then the Welcome Screen tells me that my hardware is probably failing 1:0.003
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:1819:in `/^the Welcome Screen tells me that my hardware is probably failing$/'
features/persistence.feature:188:in `Then the Welcome Screen tells me that my hardware is probably failing'
When I log in to a new session 0.000
Then the Tor Browser starts 0.000
And "Tails - Recovering the Persistent Storage of a broken Tails" has loaded in the Tor Browser 0.000
After features/support/hooks.rb:326 10.619 
SCENARIO FAILED: 'Filesystem and I/O errors' (at time 03:34:09)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:34:09_Filesystem_and_I_O_errors.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:34:09_Filesystem_and_I_O_errors.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:34:09_Filesystem_and_I_O_errors.journal
After features/support/hooks.rb:100 0.000
Feature: Using persistent Tor bridges and pluggable transports
4:11.334
Background
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive without a persistent partition and logged in 12.620
And I create a persistent partition with the default settings 21.254
Then the "TorConfiguration" tps feature is not enabled 1.056
When the network is plugged 0.059
And the Tor Connection Assistant autostarts 11.116
And I configure some persistent obfs4 bridges in the Tor Connection Assistant 11.939
And I wait until Tor is ready 1.273
Then tca.conf includes the configured bridges 0.021
And the "TorConfiguration" tps feature is enabled and active 1.123
When I cold reboot the computer 9.855
And the computer reboots Tails 1:0.673
And I enable persistence 2:0.341
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistent_tor_bridges.feature:19:in `And I enable persistence'
And I capture all network traffic 0.000
And I log in to a new session 0.000
Then tca.conf includes the configured bridges 0.000
When the network is plugged 0.000
And the Tor Connection Assistant autostarts 0.000
Feature: Using persistent Tor bridges and pluggable transports
Tags: @product
0.000
Scenario Using Persistent Tor bridges
Steps
When I choose to connect to Tor automatically 0.000
And I accept Tor Connection's offer to use my persistent bridges 0.000
And I click "Connect to Tor" 0.000
Then I wait until Tor is ready 0.000
And tca.conf includes the configured bridges 0.000
And the "TorConfiguration" tps feature is enabled and active 0.000
And all Internet traffic has only flowed through the configured bridges or connectivity check service 0.000
After features/support/hooks.rb:326 4.926 
SCENARIO FAILED: 'Using Persistent Tor bridges' (at time 03:38:31)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:38:31_Using_Persistent_Tor_bridges.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:38:31_Using_Persistent_Tor_bridges.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:38:31_Using_Persistent_Tor_bridges.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:38:31_Using_Persistent_Tor_bridges.journal
After features/support/hooks.rb:100 0.008
Feature: Using persistent Tor bridges and pluggable transports
4:4.361
Background
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive without a persistent partition and logged in 9.464
And I create a persistent partition with the default settings 21.775
Then the "TorConfiguration" tps feature is not enabled 1.080
When the network is plugged 0.071
And the Tor Connection Assistant autostarts 7.818
And I configure some persistent obfs4 bridges in the Tor Connection Assistant 10.376
And I wait until Tor is ready 2.983
Then tca.conf includes the configured bridges 0.018
And the "TorConfiguration" tps feature is enabled and active 1.203
When I cold reboot the computer 9.728
And the computer reboots Tails 59.444
And I enable persistence 2:0.397
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistent_tor_bridges.feature:19:in `And I enable persistence'
And I capture all network traffic 0.000
And I log in to a new session 0.000
Then tca.conf includes the configured bridges 0.000
When the network is plugged 0.000
And the Tor Connection Assistant autostarts 0.000
Feature: Using persistent Tor bridges and pluggable transports
Tags: @product
0.000
Scenario Disabling persistence of Tor bridges
Steps
When I choose to connect to Tor automatically 0.000
And I accept Tor Connection's offer to use my persistent bridges 0.000
And I disable saving bridges to Persistent Storage 0.000
And I configure a direct connection in the Tor Connection Assistant 0.000
Then I wait until Tor is ready 0.000
And tca.conf includes no bridge 0.000
And the "TorConfiguration" tps feature is not enabled and not active 0.000
And all Internet traffic has only flowed through Tor or connectivity check service 0.000
After features/support/hooks.rb:326 5.554 
SCENARIO FAILED: 'Disabling persistence of Tor bridges' (at time 03:42:41)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:42:41_Disabling_persistence_of_Tor_bridges.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:42:41_Disabling_persistence_of_Tor_bridges.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:42:41_Disabling_persistence_of_Tor_bridges.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:42:41_Disabling_persistence_of_Tor_bridges.journal
After features/support/hooks.rb:100 0.008
Feature: Tails has a sane default configuration
Tags: @product
2:10.566
Scenario No unexpected error messages in the journal after booting from USB drive
Before features/support/hooks.rb:269 0.007
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.566
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/sane_defaults.feature:24:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then there are no unexpected messages of priority "err" or higher in the journal 0.000
After features/support/hooks.rb:326 5.598 
SCENARIO FAILED: 'No unexpected error messages in the journal after booting from USB drive' (at time 03:48:42)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:48:42_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:48:42_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:48:42_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/03:48:42_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.journal
After features/support/hooks.rb:100 0.000
Feature: Browsing the web using the Tor Browser
Tags: @product
2:9.956
Scenario The persistent Tor Browser directory is usable
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.956
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/torified_browsing.feature:119:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And I successfully configure Tor 0.000
And available upgrades have been checked 0.000
And all notifications have disappeared 0.000
Then the persistent Tor Browser directory exists 0.000
And there is a GNOME bookmark for the persistent Tor Browser directory 0.000
When I start the Tor Browser 0.000
And I open the address "https://tails.net/about" in the Tor Browser 0.000
And "Tails - How Tails works" has loaded in the Tor Browser 0.000
Then I can save the current page as "index.html" to the persistent Tor Browser directory 0.000
And I open the address "file:///home/amnesia/Persistent/Tor Browser/index.html" in the Tor Browser 0.000
Then "Tails - How Tails works" has loaded in the Tor Browser 0.000
And I can print the current page as "output.pdf" to the persistent Tor Browser directory 0.000
After features/support/hooks.rb:326 5.072 
SCENARIO FAILED: 'The persistent Tor Browser directory is usable' (at time 04:12:50)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:12:50_The_persistent_Tor_Browser_directory_is_usable.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:12:50_The_persistent_Tor_Browser_directory_is_usable.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:12:50_The_persistent_Tor_Browser_directory_is_usable.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:12:50_The_persistent_Tor_Browser_directory_is_usable.journal
After features/support/hooks.rb:100 0.000
Feature: Browsing the web using the Tor Browser
Tags: @product
2:9.808
Scenario Persistent browser bookmarks
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.808
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/torified_browsing.feature:149:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And all tps features are active 0.000
And all persistent filesystems have safe access rights 0.000
And all persistence configuration files have safe access rights 0.000
And all persistent directories have safe access rights 0.000
When I start the Tor Browser in offline mode 0.000
And I add a bookmark to eff.org in the Tor Browser 0.000
And I cold reboot the computer 0.000
And the computer reboots Tails 0.000
And I enable persistence 0.000
And I log in to a new session 0.000
And all notifications have disappeared 0.000
And I start the Tor Browser in offline mode 0.000
Then the Tor Browser has a bookmark to eff.org 0.000
After features/support/hooks.rb:326 5.066 
SCENARIO FAILED: 'Persistent browser bookmarks' (at time 04:18:55)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:18:55_Persistent_browser_bookmarks.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:18:55_Persistent_browser_bookmarks.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:18:55_Persistent_browser_bookmarks.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:18:55_Persistent_browser_bookmarks.journal
After features/support/hooks.rb:100 0.000
Feature: Using Totem
Tags: @product
2:9.358
Scenario Watching MP4 videos stored on the persistent volume should work as expected given our AppArmor confinement
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.358
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/totem.feature:55:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I plug and mount a USB drive containing sample videos 0.000
And I copy the sample videos to "/home/amnesia/Persistent" as user "amnesia" 0.000
When I open "/home/amnesia/Persistent/video.mp4" with Totem 0.000
Then I see "SampleLocalMp4VideoFrame.png" after at most 40 seconds 0.000
Given I close Totem 0.000
And I start monitoring the AppArmor log of "/usr/bin/totem" 0.000
And I copy the sample videos to "/home/amnesia/.gnupg" as user "amnesia" 0.000
When I try to open "/home/amnesia/.gnupg/video.mp4" with Totem 0.000
Then Totem tells me it is not allowed to open this file 0.000
And AppArmor has denied "/usr/bin/totem" from opening "/home/amnesia/.gnupg/video.mp4" 0.000
After features/support/hooks.rb:326 5.210 
SCENARIO FAILED: 'Watching MP4 videos stored on the persistent volume should work as expected given our AppArmor confinement' (at time 04:24:05)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:24:05_Watching_MP4_videos_stored_on_the_persistent_volume_should_work_as_expected_given_our_AppArmor_confinement.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:24:05_Watching_MP4_videos_stored_on_the_persistent_volume_should_work_as_expected_given_our_AppArmor_confinement.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:24:05_Watching_MP4_videos_stored_on_the_persistent_volume_should_work_as_expected_given_our_AppArmor_confinement.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/47/artifact/build-artifacts/04:24:05_Watching_MP4_videos_stored_on_the_persistent_volume_should_work_as_expected_given_our_AppArmor_confinement.journal
After features/support/hooks.rb:100 0.000