Project Number Date
test_Tails_ISO_15451-support-manual-fsck-on-error 52 28 Aug 2024, 19:47

Failures Overview

The following summary displays scenarios that failed.

Feature: System memory erasure on shutdown
Tags: @product @slow @not_release_blocker
7:11.682
Scenario Erasure of read and write disk caches of persistent data on shutdown
Before features/support/hooks.rb:269 0.002
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 7:11.682
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/erase_memory.feature:75:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I prepare Tails for memory erasure tests 0.000
When I fill a 128 MiB file with a known pattern on the persistent filesystem 0.000
When I trigger shutdown 0.000
Then I find very few patterns in the guest's memory after 20 seconds 0.000
After features/support/hooks.rb:326 5.409 
SCENARIO FAILED: 'Erasure of read and write disk caches of persistent data on shutdown' (at time 00:40:09)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:40:09_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:40:09_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:40:09_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:40:09_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.journal
After features/support/hooks.rb:100 0.012
Feature: Installing Tails to a USB drive
Tags: @product
2:10.781
Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage
Before features/support/hooks.rb:269 0.002
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.781
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:45:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I create a file in the Persistent directory 0.000
And I temporarily create a 7200 MiB disk named "install" 0.000
And I create a gpt partition with a vfat filesystem on disk "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails with Persistent Storage to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is a persistence partition on USB drive "install" 0.000
And the USB drive "install" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:326 5.250 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage' (at time 00:48:22)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:48:22_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:48:22_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:48:22_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:48:22_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Feature: Installing Tails to a USB drive
Tags: @product
2:8.916
Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage
Before features/support/hooks.rb:269 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:8.916
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:57:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I temporarily create a 7200 MiB disk named "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:326 5.723 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage' (at time 00:50:36)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:50:36_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:50:36_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:50:36_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:50:36_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Feature: Installing Tails to a USB drive
Tags: @product
2:9.086
Scenario Re-installing Tails over an existing USB installation with a persistent partition
Before features/support/hooks.rb:269 0.002
Steps
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.086
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:70:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I have started Tails from DVD without network and logged in 0.000
And I clone USB drive "__internal" to a temporary USB drive "install" 0.000
And I plug USB drive "install" 0.000
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:326 5.627 
SCENARIO FAILED: 'Re-installing Tails over an existing USB installation with a persistent partition' (at time 00:52:51)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:52:51_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:52:51_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:52:51_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/00:52:51_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.journal
After features/support/hooks.rb:100 0.000
Feature: Additional software
Tags: @product @check_tor_leaks @slow
5:17.364
Scenario I set up Additional Software when installing a package without persistent partition and the package is installed next time I start Tails
Before features/support/hooks.rb:269 0.003
Before features/support/hooks.rb:507 0.007
Steps
Given I start Tails from a freshly installed USB drive with an administration password and the network is plugged and I login 1:1.662
And I update APT using apt 11.691
And I install "popularity-contest" using apt 22.443
Then I am proposed to add the "popularity-contest" package to my Additional Software 7.928
When I create a persistent storage and activate the Additional Software feature 20.639
Then Additional Software is correctly configured for package "popularity-contest" 1.621
When I shutdown Tails and wait for the computer to power off 10.606
And I start Tails from USB drive "__internal" with network unplugged 1:0.466
And I enable persistence 2:0.303
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/additional_software_packages.feature:36:in `And I enable persistence'
And I log in to a new session 0.000
And the Additional Software installation service has started 0.000
Then I am notified that the installation succeeded 0.000
And Additional Software is correctly configured for package "popularity-contest" 0.000
And the package "popularity-contest" is installed after Additional Software has been started 0.000
After features/support/hooks.rb:515 0.033
After features/support/hooks.rb:326 5.284 
SCENARIO FAILED: 'I set up Additional Software when installing a package without persistent partition and the package is installed next time I start Tails' (at time 01:08:22)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:08:22_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:08:22_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:08:22_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:08:22_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:08:22_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:08:22_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:08:22_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:08:22_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.journal
After features/support/hooks.rb:100 0.008
Feature: Additional software
Tags: @product @check_tor_leaks @slow
3:0.190
Scenario My Additional Software list is configurable through a GUI or through notifications when I install or remove packages with APT or Synaptic
Before features/support/hooks.rb:269 0.006
Before features/support/hooks.rb:507 0.005
Steps
Given a computer 0.186
And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password 3:0.004
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:294:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/additional_software_packages.feature:55:in `And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password'
When I uninstall "popularity-contest" using apt 0.000
And I accept removing "popularity-contest" from Additional Software 0.000
Then "popularity-contest" is not in the list of Additional Software 0.000
When I start Synaptic 0.000
And I update APT using Synaptic 0.000
And I install "cowsay" using Synaptic 0.000
And I accept adding "cowsay" to Additional Software 0.000
Then Additional Software is correctly configured for package "cowsay" 0.000
When I uninstall "cowsay" using apt 0.000
And I refuse removing "cowsay" from Additional Software 0.000
Then Additional Software is correctly configured for package "cowsay" 0.000
When I start "Additional Software" via GNOME Activities Overview 0.000
And I remove "cowsay" from the list of Additional Software using Additional Software GUI 0.000
Then "cowsay" is not in the list of Additional Software 0.000
When I install "cowsay" using apt 0.000
And I refuse adding "cowsay" to Additional Software 0.000
Then "cowsay" is not in the list of Additional Software 0.000
After features/support/hooks.rb:515 0.029
After features/support/hooks.rb:326 5.324 
SCENARIO FAILED: 'My Additional Software list is configurable through a GUI or through notifications when I install or remove packages with APT or Synaptic' (at time 01:14:19)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:14:19_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:14:19_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:14:19_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:14:19_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:14:19_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:14:19_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:14:19_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:14:19_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.journal
After features/support/hooks.rb:100 0.010
Feature: Additional software
Tags: @product @check_tor_leaks @slow @not_release_blocker
3:0.127
Scenario Recovering in offline mode after Additional Software previously failed to upgrade and then succeed to upgrade when online
Before features/support/hooks.rb:269 0.006
Before features/support/hooks.rb:507 0.005
Steps
Given a computer 0.171
And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password 2:59.956
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:294:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/additional_software_packages.feature:79:in `And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password'
And I configure APT to prefer an old version of cowsay 0.000
When I install an old version "3.03+dfsg2-1" of the cowsay package using apt 0.000
And I accept adding "cowsay" to Additional Software 0.000
And Additional Software is correctly configured for package "cowsay" 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
# We need to add back this custom APT source for the Additional Software
# install step, as it was not saved in persistence
And I configure APT to prefer an old version of cowsay 0.000
And I log in to a new session 0.000
And the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started 0.000
And I revert the APT tweaks that made it prefer an old version of cowsay 0.000
# We remove the newest package after it has been downloaded and before
# it is installed, so that the upgrade process fails
And I prepare the Additional Software upgrade process to fail 0.000
And the network is plugged 0.000
And Tor is ready 0.000
# Note: the next step races against the appearance of the "The
# upgrade of your additional software failed" notification.
# It should win most of the time, which is good, but there's no
# guarantee it does. If it loses, then it'll remove the notification
# we'll be trying to interact with below ("I can open…")
And all notifications have disappeared 0.000
And available upgrades have been checked 0.000
And I see the "The upgrade of your additional software failed" notification after at most 300 seconds 0.000
And I can open the Additional Software configuration window from the notification 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
# We need to add back this custom APT source for the Additional Software
# install step, as it was not saved in persistence
And I configure APT to prefer an old version of cowsay 0.000
And I log in to a new session 0.000
And the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started 0.000
And I revert the APT tweaks that made it prefer an old version of cowsay 0.000
And the network is plugged 0.000
And Tor is ready 0.000
Then the Additional Software upgrade service has started 0.000
And the installed version of package "cowsay" is newer than "3.03+dfsg2-1" 0.000
After features/support/hooks.rb:515 0.032
After features/support/hooks.rb:326 5.514 
SCENARIO FAILED: 'Recovering in offline mode after Additional Software previously failed to upgrade and then succeed to upgrade when online' (at time 01:17:25)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:17:25_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:17:25_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:17:25_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:17:25_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:17:25_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:17:25_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:17:25_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:17:25_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.journal
After features/support/hooks.rb:100 0.007
Feature: Additional software
Tags: @product @check_tor_leaks @slow @not_release_blocker_inherited
3:1.427
Scenario I am notified when Additional Software fails to install a package
Before features/support/hooks.rb:269 0.003
Before features/support/hooks.rb:507 0.004
Steps
Given a computer 0.177
And I start Tails from USB drive "__internal" with network unplugged 1:0.889
And I enable persistence 2:0.360
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/additional_software_packages.feature:126:in `And I enable persistence'
And I remove the "cowsay" deb files from the APT cache 0.000
# Prevent the "Warning: virtual machine detected!" notification from racing
# with the one we'll be interacting with below.
And I disable the tails-virt-notify-user.service user unit 0.000
And I log in to a new session 0.000
Then I see the "The installation of your additional software failed" notification after at most 300 seconds 0.000
And I can open the Additional Software log file from the notification 0.000
And the package "cowsay" is not installed 0.000
After features/support/hooks.rb:515 0.031
After features/support/hooks.rb:326 5.305 
SCENARIO FAILED: 'I am notified when Additional Software fails to install a package' (at time 01:20:32)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:20:32_I_am_notified_when_Additional_Software_fails_to_install_a_package.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:20:32_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:20:32_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:20:32_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:20:32_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:20:32_I_am_notified_when_Additional_Software_fails_to_install_a_package.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:20:32_I_am_notified_when_Additional_Software_fails_to_install_a_package.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:20:32_I_am_notified_when_Additional_Software_fails_to_install_a_package.journal
After features/support/hooks.rb:100 0.008
Feature: Upgrading an old Tails USB installation
Tags: @product
3:4.124
Scenario Booting Tails from a USB drive upgraded from USB with persistence enabled
Before features/support/hooks.rb:269 0.006
Steps
Given a computer 0.180
And I start Tails from USB drive "to_upgrade" with network unplugged and I login with persistence enabled 3:3.944
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:294:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_upgrade.feature:73:in `And I start Tails from USB drive "to_upgrade" with network unplugged and I login with persistence enabled'
Then all tps features from the old Tails version are active 0.000
And Tails is running from USB drive "to_upgrade" 0.000
And the boot device has safe access rights 0.000
And the expected persistent files created with the old Tails version are present in the filesystem 0.000
And all persistent directories from the old Tails version have safe access rights 0.000
After features/support/hooks.rb:326 4.928 
SCENARIO FAILED: 'Booting Tails from a USB drive upgraded from USB with persistence enabled' (at time 01:33:32)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:33:32_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:33:32_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:33:32_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:33:32_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.journal
After features/support/hooks.rb:100 0.007
Feature: Upgrading an old Tails USB installation
Tags: @product @automatic_upgrade
2:11.075
Scenario Upgrading an initial Tails installation with an incremental upgrade
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:11.075
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_upgrade.feature:82:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And no SquashFS delta is installed 0.000
And Tails is fooled to think that version 6.0~testoverlayfs was initially installed 0.000
And Tails is fooled to think it is running version 6.0~testoverlayfs 0.000
And the file system changes introduced in version 6.2~testoverlayfs are not present 0.000
And the file system changes introduced in version 6.3~testoverlayfs are not present 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.2~testoverlayfs 0.000
And I can successfully install the incremental upgrade to version 6.2~testoverlayfs 0.000
Given I shutdown Tails and wait for the computer to power off 0.000
When I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then Tails is running version 6.2~testoverlayfs 0.000
And all tps features are active 0.000
And the file system changes introduced in version 6.2~testoverlayfs are present 0.000
And only the 6.2~testoverlayfs SquashFS delta is installed 0.000
# Our IUK sets a release date that can make Tor bootstrapping impossible
Given Tails system time is magically synchronized 0.000
# We'll really install Tails_amd64_6.0~testoverlayfs_to_6.3~testoverlayfs.iuk
# but we need some way to force upgrading a second time in a row
# even if only the initially installed version is considered
And Tails is fooled to think that version 6.1~testoverlayfs was initially installed 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.3~testoverlayfs 0.000
And I can successfully install the incremental upgrade to version 6.3~testoverlayfs 0.000
Given I shutdown Tails and wait for the computer to power off 0.000
When I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then Tails is running version 6.3~testoverlayfs 0.000
And all tps features are active 0.000
And the file system changes introduced in version 6.3~testoverlayfs are present 0.000
And only the 6.3~testoverlayfs SquashFS delta is installed 0.000
# Regression test for #17425 (i.e. the Upgrader would propose
# upgrading to the version that's already running)
Given Tails system time is magically synchronized 0.000
And Tails is fooled to think that version 6.1~testoverlayfs was initially installed 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then the Upgrader considers the system as up-to-date 0.000
# Regression test on #8158 (i.e. the IUK's filesystem is not part of the Unsafe Browser's chroot)
And I successfully start the Unsafe Browser 0.000
And the file system changes introduced in version 6.3~testoverlayfs are present in the Unsafe Browser's chroot 0.000
After features/support/hooks.rb:326 5.628 
SCENARIO FAILED: 'Upgrading an initial Tails installation with an incremental upgrade' (at time 01:35:48)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:35:48_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:35:48_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:35:48_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:35:48_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.journal
After features/support/hooks.rb:100 0.000
Feature: Upgrading an old Tails USB installation
Tags: @product @automatic_upgrade
2:9.991
Scenario Upgrading a Tails whose signing key is outdated
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.991
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_upgrade.feature:127:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And Tails is fooled to think that version 6.0~testoverlayfs was initially installed 0.000
And Tails is fooled to think it is running version 6.0~testoverlayfs 0.000
And the signing key used by the Upgrader is outdated 0.000
But a current signing key is available on our website 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.2~testoverlayfs 0.000
After features/support/hooks.rb:326 5.418 
SCENARIO FAILED: 'Upgrading a Tails whose signing key is outdated' (at time 01:38:04)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:38:04_Upgrading_a_Tails_whose_signing_key_is_outdated.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:38:04_Upgrading_a_Tails_whose_signing_key_is_outdated.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:38:04_Upgrading_a_Tails_whose_signing_key_is_outdated.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:38:04_Upgrading_a_Tails_whose_signing_key_is_outdated.journal
After features/support/hooks.rb:100 0.000
Feature: Emergency shutdown
Tags: @product @not_release_blocker
55.066
Scenario Tails erases memory on DVD boot medium removal: LUKS-encrypted ext4
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails from DVD without network and logged in 9.212
And I prepare Tails for memory erasure tests 0.698
And I plug and mount a 128 MiB USB drive with an ext4 filesystem encrypted with password "asdf" 45.155
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:787:in `deal_with_polkit_prompt'
./features/step_definitions/common_steps.rb:1488:in `/^I plug and mount a (\d+) MiB USB drive with an? (.*)$/'
features/emergency_shutdown.feature:39:in `And I plug and mount a 128 MiB USB drive with an ext4 filesystem encrypted with password "asdf"'
And I fill the USB drive with a known pattern 0.000
And I read the content of the test FS 0.000
And patterns cover at least 99% of the test FS size in the guest's memory 0.000
When I eject the boot medium 0.000
And I wait for Tails to finish wiping the memory 0.000
Then I find very few patterns in the guest's memory 0.000
After features/support/hooks.rb:326 5.421 
SCENARIO FAILED: 'Tails erases memory on DVD boot medium removal: LUKS-encrypted ext4' (at time 01:41:30)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:41:30_Tails_erases_memory_on_DVD_boot_medium_removal:_LUKS-encrypted_ext4.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:41:30_Tails_erases_memory_on_DVD_boot_medium_removal:_LUKS-encrypted_ext4.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:41:30_Tails_erases_memory_on_DVD_boot_medium_removal:_LUKS-encrypted_ext4.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:41:30_Tails_erases_memory_on_DVD_boot_medium_removal:_LUKS-encrypted_ext4.journal
After features/support/hooks.rb:100 0.003
Feature: Emergency shutdown
Tags: @product @not_release_blocker
2:9.654
Scenario Tails erases memory and shuts down on USB boot medium removal: persistent data
Before features/support/hooks.rb:269 0.009
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.654
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/emergency_shutdown.feature:48:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I prepare Tails for memory erasure tests 0.000
And I fill a 128 MiB file with a known pattern on the persistent filesystem 0.000
And patterns cover at least 100 MiB in the guest's memory 0.000
When I eject the boot medium 0.000
And I wait for Tails to finish wiping the memory 0.000
Then I find very few patterns in the guest's memory 0.000
And Tails eventually shuts down 0.000
After features/support/hooks.rb:326 5.145 
SCENARIO FAILED: 'Tails erases memory and shuts down on USB boot medium removal: persistent data' (at time 01:43:45)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:43:45_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:43:45_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:43:45_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:43:45_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.journal
After features/support/hooks.rb:100 0.000
Feature: Backing up the persistent storage
Tags: @product
2:8.974
Scenario Using Tails' custom backup tool to backup a newly added file
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:8.974
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/backup.feature:8:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# The volume cannot be in use when GuestFs clones it, which we do below
And I shutdown Tails and wait for the computer to power off 0.000
And I clone USB drive "__internal" to a temporary USB drive "backup" 0.000
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 0.000
And I write a file "/live/persistence/TailsData_unlocked/new" with contents "foo" 0.000
When I start Tails' custom backup tool 0.000
Then the backup tool displays "Plug in your backup Tails USB stick" 0.000
When I plug USB drive "backup" 0.000
And I give the Persistent Storage on drive "backup" its own UUID 0.000
And I click "Retry" in the backup tool 0.000
Then the backup tool displays "Do you want to back up your Persistent Storage now?" 0.000
When I click "Back Up" in the backup tool 0.000
And I enter my persistent storage passphrase into the polkit prompt 0.000
Then the backup tool displays "Your Persistent Storage was backed up successfully to your backup Tails USB stick!" 0.000
# The backup tool ejects the drive, so we have to replug it
When I unplug USB drive "backup" 0.000
And I plug USB drive "backup" 0.000
Then the USB drive "backup" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:326 5.484 
SCENARIO FAILED: 'Using Tails' custom backup tool to backup a newly added file' (at time 01:46:56)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:46:56_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:46:56_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:46:56_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:46:56_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.journal
After features/support/hooks.rb:100 0.000
Feature: Using Evince
Tags: @product
2:9.318
Scenario I can view and print a PDF file stored in persistent /home/amnesia/Persistent
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.318
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/evince.feature:45:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I copy "/usr/share/cups/data/default-testpage.pdf" to "/home/amnesia/Persistent" as user "amnesia" 0.000
Then the file "/home/amnesia/Persistent/default-testpage.pdf" exists 0.000
When I open "/home/amnesia/Persistent/default-testpage.pdf" with Evince 0.000
Then I see "CupsTestPage.png" after at most 40 seconds 0.000
And I can print the current document to "/home/amnesia/Persistent/output.pdf" 0.000
After features/support/hooks.rb:326 5.428 
SCENARIO FAILED: 'I can view and print a PDF file stored in persistent /home/amnesia/Persistent' (at time 01:53:23)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:53:23_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:53:23_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:53:23_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:53:23_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.journal
After features/support/hooks.rb:100 0.000
Feature: Using Evince
Tags: @product @not_release_blocker
2:9.104
Scenario I cannot view a PDF file stored in persistent /home/amnesia/.gnupg
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.104
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/evince.feature:54:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I copy "/usr/share/cups/data/default-testpage.pdf" to "/home/amnesia/.gnupg" as user "amnesia" 0.000
Then the file "/home/amnesia/.gnupg/default-testpage.pdf" exists 0.000
Given I start monitoring the AppArmor log of "/usr/bin/evince" 0.000
And I try to open "/home/amnesia/.gnupg/default-testpage.pdf" with Evince 0.000
Then Evince tells me it cannot open "/home/amnesia/.gnupg/default-testpage.pdf" 0.000
And AppArmor has denied "/usr/bin/evince" from opening "/home/amnesia/.gnupg/default-testpage.pdf" 0.000
After features/support/hooks.rb:326 5.037 
SCENARIO FAILED: 'I cannot view a PDF file stored in persistent /home/amnesia/.gnupg' (at time 01:55:38)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:55:38_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:55:38_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:55:38_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:55:38_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.journal
After features/support/hooks.rb:100 0.000
Feature: GNOME is well-integrated into Tails
Tags: @product
2:9.112
Scenario I can launch various apps via GNOME Activities Overview
Before features/support/hooks.rb:269 0.007
Steps
# Some apps (Electrum and Persistent Storage Backup) only start when
# a Persistent Storage is available.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.112
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/gnome.feature:22:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# Some apps (Tor Browser) only start when the network is plugged.
And the network is plugged 0.000
And Tor is ready 0.000
And all notifications have disappeared 0.000
When I start "Additional Software" via GNOME Activities Overview 0.000
And I close the "tails-additional-software-config" window 0.000
When I start "Disks" via GNOME Activities Overview 0.000
# The close button of GNOME Disks is not accessible
And I close the "gnome-disks" window via Alt+F4 0.000
When I start "GNOME Terminal" via GNOME Activities Overview 0.000
And I close the "gnome-terminal-server" window 0.000
When I start "Files" via GNOME Activities Overview 0.000
And I close the "org.gnome.Nautilus" window 0.000
When I start "Persistent Storage" via GNOME Activities Overview 0.000
And I close the "tps-frontend" window 0.000
When I start "Persistent Storage Backup" via GNOME Activities Overview 0.000
And I close the "zenity" window 0.000
When I start "Pidgin" via GNOME Activities Overview 0.000
And I close the "Pidgin" window via Alt+F4 0.000
When I start "Thunderbird" via GNOME Activities Overview 0.000
And I close the "Thunderbird" window 0.000
When I start "Tor Browser" via GNOME Activities Overview 0.000
And I close the "Firefox" window 0.000
When I start "Unlock VeraCrypt Volumes" via GNOME Activities Overview 0.000
And I close the "unlock-veracrypt-volumes" window 0.000
When I start "Unsafe Browser" via GNOME Activities Overview 0.000
And I close the "Firefox" window 0.000
After features/support/hooks.rb:326 5.199 
SCENARIO FAILED: 'I can launch various apps via GNOME Activities Overview' (at time 01:58:23)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:58:23_I_can_launch_various_apps_via_GNOME_Activities_Overview.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:58:23_I_can_launch_various_apps_via_GNOME_Activities_Overview.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:58:23_I_can_launch_various_apps_via_GNOME_Activities_Overview.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/01:58:23_I_can_launch_various_apps_via_GNOME_Activities_Overview.journal
After features/support/hooks.rb:100 0.000
Feature: Hardware failures
Tags: @product @doc
2:9.584
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:269 0.005
Steps
Given a computer 0.180
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.403
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:27:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:21:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the SquashFS 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:326 5.049 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#1)' (at time 02:02:43)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:02:43_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:02:43_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:02:43_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:02:43_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.journal
After features/support/hooks.rb:100 0.000
Feature: Hardware failures
Tags: @product @doc
2:9.753
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:269 0.005
Steps
Given a computer 0.163
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.589
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:28:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:21:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the boot device 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:326 5.459 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#2)' (at time 02:04:58)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:04:58_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:04:58_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:04:58_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:04:58_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.journal
After features/support/hooks.rb:100 0.000
Feature: Hardware failures
Tags: @product @doc
2:9.733
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:269 0.005
Steps
Given a computer 0.162
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.570
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:29:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:21:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the boot device with a target error 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:326 5.068 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#3)' (at time 02:07:13)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:07:13_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:07:13_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:07:13_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:07:13_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
4:52.160
Scenario Creating a Persistent Storage
Before features/support/hooks.rb:269 0.003
Steps
Given I have started Tails without network from a USB drive without a persistent partition and logged in 1:7.548
Then Tails is running from USB drive "__internal" 0.412
When I create a file in the Persistent directory 0.234
And I create a persistent partition with the default settings 22.822
Then the file I created was copied to the Persistent Storage 0.625
When I shutdown Tails and wait for the computer to power off 15.229
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 3:5.287
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:294:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/persistence.feature:26:in `And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled'
Then persistence for "Persistent" is active 0.000
And the file I created in the Persistent directory exists 0.000
After features/support/hooks.rb:326 5.109 
SCENARIO FAILED: 'Creating a Persistent Storage' (at time 02:56:44)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:56:44_Creating_a_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:56:44_Creating_a_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:56:44_Creating_a_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/02:56:44_Creating_a_Persistent_Storage.journal
After features/support/hooks.rb:100 0.026
Feature: Tails persistence
Tags: @product
2:11.131
Scenario Booting Tails from a USB drive with an enabled persistent partition and reconfiguring it
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:11.131
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:42:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then Tails is running from USB drive "__internal" 0.000
And all tps features are active 0.000
And all persistent directories have safe access rights 0.000
When I disable the first tps feature 0.000
Then all tps features but the first one are active 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then all tps features but the first one are active 0.000
After features/support/hooks.rb:326 5.537 
SCENARIO FAILED: 'Booting Tails from a USB drive with an enabled persistent partition and reconfiguring it' (at time 03:00:00)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:00:00_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:00:00_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:00:00_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:00:00_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.512
Scenario Activating and deactivating Persistent Storage features
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.512
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:53:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then persistence for "Persistent" is active 0.000
And I create a file in the Persistent directory 0.000
Then the file I created was copied to the Persistent Storage 0.000
When I disable the first tps feature 0.000
Then persistence for "Persistent" is not active 0.000
And the Persistent directory does not exist 0.000
When I enable the first tps feature 0.000
Then persistence for "Persistent" is active 0.000
And the file I created in the Persistent directory exists 0.000
After features/support/hooks.rb:326 5.320 
SCENARIO FAILED: 'Activating and deactivating Persistent Storage features' (at time 03:02:15)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:02:15_Activating_and_deactivating_Persistent_Storage_features.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:02:15_Activating_and_deactivating_Persistent_Storage_features.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:02:15_Activating_and_deactivating_Persistent_Storage_features.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:02:15_Activating_and_deactivating_Persistent_Storage_features.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.900
Scenario Deleting data of a Persistent Storage feature
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.900
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:65:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then persistence for "Persistent" is active 0.000
When I create a file in the Persistent directory 0.000
And I disable the first tps feature 0.000
And I delete the data of the Persistent Folder feature 0.000
Then the file I created does not exist on the Persistent Storage 0.000
After features/support/hooks.rb:326 5.379 
SCENARIO FAILED: 'Deleting data of a Persistent Storage feature' (at time 03:04:30)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:04:30_Deleting_data_of_a_Persistent_Storage_feature.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:04:30_Deleting_data_of_a_Persistent_Storage_feature.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:04:30_Deleting_data_of_a_Persistent_Storage_feature.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:04:30_Deleting_data_of_a_Persistent_Storage_feature.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.115
Scenario Writing files to a read/write-enabled persistent partition
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.115
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:73:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And Tor is ready 0.000
And I take note of which tps features are available 0.000
When I write some files expected to persist 0.000
And I shutdown Tails and wait for the computer to power off 0.000
# XXX: The next step succeeds (and the --debug output confirms that it's actually looking for the files) but will fail in a subsequent scenario restoring the same snapshot. This exactly what we want, but why does it work? What is guestfs's behaviour when qcow2 internal snapshots are involved?
Then only the expected files are present on the persistence partition on USB drive "__internal" 0.000
After features/support/hooks.rb:326 5.487 
SCENARIO FAILED: 'Writing files to a read/write-enabled persistent partition' (at time 03:06:45)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:06:45_Writing_files_to_a_read_write-enabled_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:06:45_Writing_files_to_a_read_write-enabled_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:06:45_Writing_files_to_a_read_write-enabled_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:06:45_Writing_files_to_a_read_write-enabled_persistent_partition.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.826
Scenario Creating and using a persistent NetworkManager connection
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.826
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:83:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And Tor is ready 0.000
And I add a wired DHCP NetworkManager connection called "persistent-con-current" 0.000
And I shutdown Tails and wait for the computer to power off 0.000
Given I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
And I capture all network traffic 0.000
And the network is plugged 0.000
And Tor is ready 0.000
And I switch to the "persistent-con-current" NetworkManager connection 0.000
And the 1st network device has a spoofed MAC address configured 0.000
And no network device leaked the real MAC address 0.000
After features/support/hooks.rb:326 5.581 
SCENARIO FAILED: 'Creating and using a persistent NetworkManager connection' (at time 03:09:00)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:09:00_Creating_and_using_a_persistent_NetworkManager_connection.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:09:00_Creating_and_using_a_persistent_NetworkManager_connection.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:09:00_Creating_and_using_a_persistent_NetworkManager_connection.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:09:00_Creating_and_using_a_persistent_NetworkManager_connection.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.673
Scenario Persistent Greeter options
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 9.315
When I enable persistence 2:0.357
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistence.feature:104:in `When I enable persistence'
Then no persistent Greeter options were restored 0.000
When I set all Greeter options to non-default values 0.000
And I log in to a new session in German (de) after having activated the Persistent Storage 0.000
Then all Greeter options are set to non-default values 0.000
When I cold reboot the computer 0.000
And the computer reboots Tails 0.000
Given I enable persistence 0.000
Then persistent Greeter options were restored 0.000
When I log in to a new session after having activated the Persistent Storage 0.000
Then all Greeter options are set to non-default values 0.000
After features/support/hooks.rb:326 5.593 
SCENARIO FAILED: 'Persistent Greeter options' (at time 03:12:15)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:12:15_Persistent_Greeter_options.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:12:15_Persistent_Greeter_options.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:12:15_Persistent_Greeter_options.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:12:15_Persistent_Greeter_options.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:9.392
Scenario Changing the Persistent Storage passphrase
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.392
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:117:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# Note that if anything fails after the passphrase was changed and
# before it's changed back below, subsequent scenarios might fail
# because the Persistent Storage doesn't have the expected passphrase.
When I change the passphrase of the Persistent Storage 0.000
And I shutdown Tails and wait for the computer to power off 0.000
Then I start Tails from USB drive "__internal" with network unplugged and I login with the changed persistence passphrase 0.000
And I change the passphrase of the Persistent Storage back to the original 0.000
After features/support/hooks.rb:326 5.088 
SCENARIO FAILED: 'Changing the Persistent Storage passphrase' (at time 03:14:30)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:14:30_Changing_the_Persistent_Storage_passphrase.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:14:30_Changing_the_Persistent_Storage_passphrase.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:14:30_Changing_the_Persistent_Storage_passphrase.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:14:30_Changing_the_Persistent_Storage_passphrase.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:11.644
Scenario Dotfiles persistence
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:11.644
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:136:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When I write some dotfile expected to persist 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then the expected persistent dotfile is present in the filesystem 0.000
After features/support/hooks.rb:326 5.642 
SCENARIO FAILED: 'Dotfiles persistence' (at time 03:17:41)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:17:41_Dotfiles_persistence.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:17:41_Dotfiles_persistence.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:17:41_Dotfiles_persistence.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:17:41_Dotfiles_persistence.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
1:9.001
Scenario Feature activation fails
Before features/support/hooks.rb:269 0.008
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 8.659
And I create a symlink "/home/amnesia/Persistent" to "/etc" 0.080
When I try to enable persistence 0.259
Then the Welcome Screen tells me that the Persistent Folder feature couldn't be activated 1:0.001
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:1725:in `/^the Welcome Screen tells me that the Persistent Folder feature couldn't be activated$/'
features/persistence.feature:146:in `Then the Welcome Screen tells me that the Persistent Folder feature couldn't be activated'
When I log in to a new session after having activated the Persistent Storage 0.000
And all notifications have disappeared 0.000
Then the Persistent Storage settings tell me that the Persistent Folder feature couldn't be activated 0.000
And all tps features are enabled 0.000
And all tps features but the first one are active 0.000
After features/support/hooks.rb:326 9.874 
SCENARIO FAILED: 'Feature activation fails' (at time 03:18:56)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:18:56_Feature_activation_fails.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:18:56_Feature_activation_fails.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:18:56_Feature_activation_fails.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
5:9.248
Scenario LUKS header is automatically upgraded when unlocking the Persistent Storage
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a LUKS 1 persistent partition and stopped at Tails Greeter's login screen 3:8.666
And I enable persistence 2:0.581
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistence.feature:155:in `And I enable persistence'
And I log in to a new session after having activated the Persistent Storage 0.000
Then a Tails persistence partition with LUKS version 2 and argon2id exists on USB drive "__internal" 0.000
And persistence is enabled 0.000
After features/support/hooks.rb:326 8.377 
SCENARIO FAILED: 'LUKS header is automatically upgraded when unlocking the Persistent Storage' (at time 03:24:15)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:24:15_LUKS_header_is_automatically_upgraded_when_unlocking_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:24:15_LUKS_header_is_automatically_upgraded_when_unlocking_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:24:15_LUKS_header_is_automatically_upgraded_when_unlocking_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:24:15_LUKS_header_is_automatically_upgraded_when_unlocking_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:14.940
Scenario LUKS backup header is restored if something goes wrong during upgrade
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a LUKS 1 persistent partition and stopped at Tails Greeter's login screen 14.336
And I enable persistence but something goes wrong during the LUKS header upgrade 2:0.604
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/usb.rb:712:in `/^I enable persistence but something goes wrong during the LUKS header upgrade$/'
features/persistence.feature:162:in `And I enable persistence but something goes wrong during the LUKS header upgrade'
Then the Tails persistence partition on USB drive "__internal" still has LUKS version 1 0.000
After features/support/hooks.rb:326 5.224 
SCENARIO FAILED: 'LUKS backup header is restored if something goes wrong during upgrade' (at time 03:26:39)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:26:39_LUKS_backup_header_is_restored_if_something_goes_wrong_during_upgrade.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:26:39_LUKS_backup_header_is_restored_if_something_goes_wrong_during_upgrade.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:26:39_LUKS_backup_header_is_restored_if_something_goes_wrong_during_upgrade.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:26:39_LUKS_backup_header_is_restored_if_something_goes_wrong_during_upgrade.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
2:15.130
Scenario Automatic filesystem repair
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 9.602
And I corrupt the Persistent Storage filesystem on USB drive "__internal" 4.944
When I enable persistence 2:0.583
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistence.feature:168:in `When I enable persistence'
Then the filesystem of the Persistent Storage was repaired 0.000
And persistence is successfully enabled 0.000
After features/support/hooks.rb:326 5.225 
SCENARIO FAILED: 'Automatic filesystem repair' (at time 03:28:59)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:28:59_Automatic_filesystem_repair.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:28:59_Automatic_filesystem_repair.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:28:59_Automatic_filesystem_repair.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:28:59_Automatic_filesystem_repair.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
1:16.507
Scenario Manual filesystem repair
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 10.100
And I corrupt the Persistent Storage filesystem on USB drive "__internal" in a way which can't be automatically repaired 5.982
When I try to enable persistence 0.420
Then the Welcome Screen tells me that filesystem errors were found on the Persistent Storage 1:0.003
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:1733:in `/^the Welcome Screen tells me that filesystem errors were found on the Persistent Storage$/'
features/persistence.feature:176:in `Then the Welcome Screen tells me that filesystem errors were found on the Persistent Storage'
When I repair the filesystem of the Persistent Storage 0.000
Then the Welcome Screen tells me that the filesystem was repaired successfully 0.000
And the filesystem of the Persistent Storage was repaired 0.000
When I close the filesystem repair dialog 0.000
Then persistence is successfully enabled 0.000
After features/support/hooks.rb:326 10.591 
SCENARIO FAILED: 'Manual filesystem repair' (at time 03:30:21)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:30:21_Manual_filesystem_repair.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:30:21_Manual_filesystem_repair.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:30:21_Manual_filesystem_repair.journal
After features/support/hooks.rb:100 0.000
Feature: Tails persistence
Tags: @product
1:16.678
Scenario Filesystem and I/O errors
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 9.128
And I corrupt the Persistent Storage filesystem on USB drive "__internal" in a way which can't be automatically repaired 5.627
And Tails detects disk read failures on the boot device 1.529
When I try to enable persistence 0.390
Then the Welcome Screen tells me that my hardware is probably failing 1:0.002
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:1819:in `/^the Welcome Screen tells me that my hardware is probably failing$/'
features/persistence.feature:188:in `Then the Welcome Screen tells me that my hardware is probably failing'
When I log in to a new session 0.000
Then the Tor Browser starts 0.000
And "Tails - Recovering the Persistent Storage of a broken Tails" has loaded in the Tor Browser 0.000
After features/support/hooks.rb:326 10.631 
SCENARIO FAILED: 'Filesystem and I/O errors' (at time 03:31:48)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:31:48_Filesystem_and_I_O_errors.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:31:48_Filesystem_and_I_O_errors.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:31:48_Filesystem_and_I_O_errors.journal
After features/support/hooks.rb:100 0.000
Feature: Using persistent Tor bridges and pluggable transports
4:6.823
Background
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive without a persistent partition and logged in 10.795
And I create a persistent partition with the default settings 20.371
Then the "TorConfiguration" tps feature is not enabled 1.173
When the network is plugged 0.073
And the Tor Connection Assistant autostarts 9.330
And I configure some persistent obfs4 bridges in the Tor Connection Assistant 12.350
And I wait until Tor is ready 1.474
Then tca.conf includes the configured bridges 0.016
And the "TorConfiguration" tps feature is enabled and active 1.191
When I cold reboot the computer 9.746
And the computer reboots Tails 59.949
And I enable persistence 2:0.349
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistent_tor_bridges.feature:19:in `And I enable persistence'
And I capture all network traffic 0.000
And I log in to a new session 0.000
Then tca.conf includes the configured bridges 0.000
When the network is plugged 0.000
And the Tor Connection Assistant autostarts 0.000
Feature: Using persistent Tor bridges and pluggable transports
Tags: @product
0.000
Scenario Using Persistent Tor bridges
Steps
When I choose to connect to Tor automatically 0.000
And I accept Tor Connection's offer to use my persistent bridges 0.000
And I click "Connect to Tor" 0.000
Then I wait until Tor is ready 0.000
And tca.conf includes the configured bridges 0.000
And the "TorConfiguration" tps feature is enabled and active 0.000
And all Internet traffic has only flowed through the configured bridges or connectivity check service 0.000
After features/support/hooks.rb:326 5.024 
SCENARIO FAILED: 'Using Persistent Tor bridges' (at time 03:36:06)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:36:06_Using_Persistent_Tor_bridges.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:36:06_Using_Persistent_Tor_bridges.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:36:06_Using_Persistent_Tor_bridges.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:36:06_Using_Persistent_Tor_bridges.journal
After features/support/hooks.rb:100 0.008
Feature: Using persistent Tor bridges and pluggable transports
4:0.756
Background
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive without a persistent partition and logged in 9.061
And I create a persistent partition with the default settings 20.371
Then the "TorConfiguration" tps feature is not enabled 1.218
When the network is plugged 0.064
And the Tor Connection Assistant autostarts 7.332
And I configure some persistent obfs4 bridges in the Tor Connection Assistant 11.584
And I wait until Tor is ready 2.228
Then tca.conf includes the configured bridges 0.012
And the "TorConfiguration" tps feature is enabled and active 0.981
When I cold reboot the computer 9.427
And the computer reboots Tails 58.125
And I enable persistence 2:0.348
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
features/persistent_tor_bridges.feature:19:in `And I enable persistence'
And I capture all network traffic 0.000
And I log in to a new session 0.000
Then tca.conf includes the configured bridges 0.000
When the network is plugged 0.000
And the Tor Connection Assistant autostarts 0.000
Feature: Using persistent Tor bridges and pluggable transports
Tags: @product
0.000
Scenario Disabling persistence of Tor bridges
Steps
When I choose to connect to Tor automatically 0.000
And I accept Tor Connection's offer to use my persistent bridges 0.000
And I disable saving bridges to Persistent Storage 0.000
And I configure a direct connection in the Tor Connection Assistant 0.000
Then I wait until Tor is ready 0.000
And tca.conf includes no bridge 0.000
And the "TorConfiguration" tps feature is not enabled and not active 0.000
And all Internet traffic has only flowed through Tor or connectivity check service 0.000
After features/support/hooks.rb:326 5.475 
SCENARIO FAILED: 'Disabling persistence of Tor bridges' (at time 03:40:12)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:40:12_Disabling_persistence_of_Tor_bridges.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:40:12_Disabling_persistence_of_Tor_bridges.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:40:12_Disabling_persistence_of_Tor_bridges.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:40:12_Disabling_persistence_of_Tor_bridges.journal
After features/support/hooks.rb:100 0.008
Feature: Tails has a sane default configuration
Tags: @product
2:10.323
Scenario No unexpected error messages in the journal after booting from USB drive
Before features/support/hooks.rb:269 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:10.323
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/sane_defaults.feature:24:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then there are no unexpected messages of priority "err" or higher in the journal 0.000
After features/support/hooks.rb:326 5.909 
SCENARIO FAILED: 'No unexpected error messages in the journal after booting from USB drive' (at time 03:46:17)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:46:17_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:46:17_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:46:17_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/03:46:17_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.journal
After features/support/hooks.rb:100 0.000
Feature: Browsing the web using the Tor Browser
Tags: @product
2:9.659
Scenario The persistent Tor Browser directory is usable
Before features/support/hooks.rb:269 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.659
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/torified_browsing.feature:119:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And I successfully configure Tor 0.000
And available upgrades have been checked 0.000
And all notifications have disappeared 0.000
Then the persistent Tor Browser directory exists 0.000
And there is a GNOME bookmark for the persistent Tor Browser directory 0.000
When I start the Tor Browser 0.000
And I open the address "https://tails.net/about" in the Tor Browser 0.000
And "Tails - How Tails works" has loaded in the Tor Browser 0.000
Then I can save the current page as "index.html" to the persistent Tor Browser directory 0.000
And I open the address "file:///home/amnesia/Persistent/Tor Browser/index.html" in the Tor Browser 0.000
Then "Tails - How Tails works" has loaded in the Tor Browser 0.000
And I can print the current page as "output.pdf" to the persistent Tor Browser directory 0.000
After features/support/hooks.rb:326 5.451 
SCENARIO FAILED: 'The persistent Tor Browser directory is usable' (at time 04:10:08)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:10:08_The_persistent_Tor_Browser_directory_is_usable.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:10:08_The_persistent_Tor_Browser_directory_is_usable.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:10:08_The_persistent_Tor_Browser_directory_is_usable.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:10:08_The_persistent_Tor_Browser_directory_is_usable.journal
After features/support/hooks.rb:100 0.000
Feature: Browsing the web using the Tor Browser
Tags: @product
2:9.590
Scenario Persistent browser bookmarks
Before features/support/hooks.rb:269 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.590
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/torified_browsing.feature:149:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And all tps features are active 0.000
And all persistent filesystems have safe access rights 0.000
And all persistence configuration files have safe access rights 0.000
And all persistent directories have safe access rights 0.000
When I start the Tor Browser in offline mode 0.000
And I add a bookmark to eff.org in the Tor Browser 0.000
And I cold reboot the computer 0.000
And the computer reboots Tails 0.000
And I enable persistence 0.000
And I log in to a new session 0.000
And all notifications have disappeared 0.000
And I start the Tor Browser in offline mode 0.000
Then the Tor Browser has a bookmark to eff.org 0.000
After features/support/hooks.rb:326 5.126 
SCENARIO FAILED: 'Persistent browser bookmarks' (at time 04:16:05)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:16:05_Persistent_browser_bookmarks.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:16:05_Persistent_browser_bookmarks.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:16:05_Persistent_browser_bookmarks.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:16:05_Persistent_browser_bookmarks.journal
After features/support/hooks.rb:100 0.000
Feature: Using Totem
Tags: @product
2:9.188
Scenario Watching MP4 videos stored on the persistent volume should work as expected given our AppArmor confinement
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:9.188
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:683:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:702:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/totem.feature:55:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I plug and mount a USB drive containing sample videos 0.000
And I copy the sample videos to "/home/amnesia/Persistent" as user "amnesia" 0.000
When I open "/home/amnesia/Persistent/video.mp4" with Totem 0.000
Then I see "SampleLocalMp4VideoFrame.png" after at most 40 seconds 0.000
Given I close Totem 0.000
And I start monitoring the AppArmor log of "/usr/bin/totem" 0.000
And I copy the sample videos to "/home/amnesia/.gnupg" as user "amnesia" 0.000
When I try to open "/home/amnesia/.gnupg/video.mp4" with Totem 0.000
Then Totem tells me it is not allowed to open this file 0.000
And AppArmor has denied "/usr/bin/totem" from opening "/home/amnesia/.gnupg/video.mp4" 0.000
After features/support/hooks.rb:326 5.060 
SCENARIO FAILED: 'Watching MP4 videos stored on the persistent volume should work as expected given our AppArmor confinement' (at time 04:21:28)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:21:28_Watching_MP4_videos_stored_on_the_persistent_volume_should_work_as_expected_given_our_AppArmor_confinement.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:21:28_Watching_MP4_videos_stored_on_the_persistent_volume_should_work_as_expected_given_our_AppArmor_confinement.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:21:28_Watching_MP4_videos_stored_on_the_persistent_volume_should_work_as_expected_given_our_AppArmor_confinement.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_15451-support-manual-fsck-on-error/52/artifact/build-artifacts/04:21:28_Watching_MP4_videos_stored_on_the_persistent_volume_should_work_as_expected_given_our_AppArmor_confinement.journal
After features/support/hooks.rb:100 0.000