And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:0.042
And
I configure APT to prefer an old version of cowsay
0.049
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.030
And
I accept adding "cowsay" to Additional Software
4.377
And
Additional Software is correctly configured for package "cowsay"
1.695
And
I shutdown Tails and wait for the computer to power off
6.745
And
I start Tails from USB drive "__internal" with network unplugged
1:2.761
And
I enable persistence
13.488
And
I configure APT to prefer an old version of cowsay
0.039
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
43.968
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.464
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.088
And
the network is plugged
0.091
And
available upgrades have been checked
0.224
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.068
And
I can open the Additional Software configuration window from the notification
2.938
And
I shutdown Tails and wait for the computer to power off
2:2.182
And
I start Tails from USB drive "__internal" with network unplugged
1:1.492
And
I enable persistence
13.626
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
47.727
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.798
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.087
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.146
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093