And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.734
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.779
And
I accept adding "cowsay" to Additional Software
5.261
And
Additional Software is correctly configured for package "cowsay"
0.894
And
I shutdown Tails and wait for the computer to power off
6.298
And
I start Tails from USB drive "__internal" with network unplugged
58.489
And
I enable persistence
11.183
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
41.153
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.378
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.064
And
available upgrades have been checked
0.074
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.914
And
I can open the Additional Software configuration window from the notification
3.151
And
I shutdown Tails and wait for the computer to power off
2:2.391
And
I start Tails from USB drive "__internal" with network unplugged
57.459
And
I enable persistence
12.020
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
36.492
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079