And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.168
And
I configure APT to prefer an old version of cowsay
0.036
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.903
And
I accept adding "cowsay" to Additional Software
6.811
And
Additional Software is correctly configured for package "cowsay"
0.896
And
I shutdown Tails and wait for the computer to power off
6.278
And
I start Tails from USB drive "__internal" with network unplugged
58.736
And
I enable persistence
11.526
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
41.298
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.144
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.067
And
available upgrades have been checked
0.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.317
And
I can open the Additional Software configuration window from the notification
2.836
And
I shutdown Tails and wait for the computer to power off
2:6.886
And
I start Tails from USB drive "__internal" with network unplugged
1:0.385
And
I enable persistence
12.515
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
38.001
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.814
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.143
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087