And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.889
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.699
And
I accept adding "cowsay" to Additional Software
4.897
And
Additional Software is correctly configured for package "cowsay"
1.041
And
I shutdown Tails and wait for the computer to power off
4.350
And
I start Tails from USB drive "__internal" with network unplugged
38.235
And
I enable persistence
9.264
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
11.915
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.015
And
available upgrades have been checked
2.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.626
And
I can open the Additional Software configuration window from the notification
2.556
And
I shutdown Tails and wait for the computer to power off
13.310
And
I start Tails from USB drive "__internal" with network unplugged
36.238
And
I enable persistence
8.901
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.070
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056