And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:36.884
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.412
And
I accept adding "cowsay" to Additional Software
6.924
And
Additional Software is correctly configured for package "cowsay"
1.009
And
I shutdown Tails and wait for the computer to power off
6.498
And
I start Tails from USB drive "__internal" with network unplugged
1:2.510
And
I enable persistence
14.401
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
44.896
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.660
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.100
And
the network is plugged
0.296
And
available upgrades have been checked
0.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.092
And
I can open the Additional Software configuration window from the notification
3.695
And
I shutdown Tails and wait for the computer to power off
18.969
And
I start Tails from USB drive "__internal" with network unplugged
1:6.535
And
I enable persistence
13.281
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
43.876
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.095
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.105