Cucumber Reports (no 1) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_20268-more-early-patch-functionality	1	15 Mar 2024, 06:37

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:20.431	Passed

Tags: @product @not_release_blocker

33.948

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.930

And I temporarily create a 4 GiB disk named "gptfat" 0.037

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.968

And I plug USB drive "gptfat" 2.484

When I start Tails Installer 19.484

Then I am told by Tails Installer that the destination device "is too small" 0.042

Hooks

After features/support/hooks.rb:291 0.846

After features/support/hooks.rb:75 0.001

Tags: @product

28.570

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.901

And I temporarily create a 7200 MiB disk named "temp" 0.034

And I start Tails Installer 17.766

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.568

Then the "temp" USB drive is selected 0.076

When I unplug USB drive "temp" 0.185

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 0.690

After features/support/hooks.rb:75 0.000

Tags: @product

3:49.940

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.906

And I temporarily create a 7200 MiB disk named "install" 0.037

And I create a gpt partition with a vfat filesystem on disk "install" 4.020

And I plug USB drive "install" 2.458

And I install Tails to USB drive "install" by cloning 3:25.686

Then the running Tails is installed on USB drive "install" 9.768

But there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.121

After features/support/hooks.rb:75 0.110

Tags: @product

3:45.200

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.064

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.404

And I install Tails to USB drive "install" by cloning 3:24.718

Then the running Tails is installed on USB drive "install" 9.900

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.062

After features/support/hooks.rb:75 0.110

Tags: @product

4:22.066

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.901

And I create a file in the Persistent directory 0.060

And I temporarily create a 7200 MiB disk named "install" 0.038

And I create a gpt partition with a vfat filesystem on disk "install" 3.970

And I plug USB drive "install" 2.473

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:48.877

Then the running Tails is installed on USB drive "install" 13.154

And there is a persistence partition on USB drive "install" 0.066

And the USB drive "install" contains the same files as my persistent storage 2.523

Hooks

After features/support/hooks.rb:291 1.939

After features/support/hooks.rb:75 0.122

Tags: @product

3:53.887

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.866

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.414

And I install Tails to USB drive "install" by cloning 3:26.688

Then the running Tails is installed on USB drive "install" 13.804

And there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 1.407

After features/support/hooks.rb:75 0.097

Tags: @product

3:57.992

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.096

And I have started Tails from DVD without network and logged in 8.333

And I clone USB drive "__internal" to a temporary USB drive "install" 1.129

And I plug USB drive "install" 2.476

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:23.688

Then the running Tails is installed on USB drive "install" 12.218

And there is no persistence partition on USB drive "install" 0.049

Hooks

After features/support/hooks.rb:291 1.138

After features/support/hooks.rb:75 0.115

Tags: @product @uefi

1:36.328

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.100

And I power off the computer 0.311

And the computer is set to boot in UEFI mode 0.020

When I start Tails from USB drive "__internal" with network unplugged and I login 1:22.985

Then Tails is running from USB drive "__internal" 0.306

And the boot device has safe access rights 2.563

And Tails has started in UEFI mode 0.040

Hooks

After features/support/hooks.rb:291 0.598

After features/support/hooks.rb:75 0.005

Tags: @product

1:29.948

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.002

And I plug and mount a USB drive containing a Tails USB image 26.672

And I create a 7200 MiB disk named "usbimage" 0.033

And I plug USB drive "usbimage" 2.373

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 52.867

Hooks

After features/support/hooks.rb:291 1.688

After features/support/hooks.rb:75 0.082

Tags: @product

1:22.547

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.125

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:21.426

Then Tails is running from USB drive "usbimage" 0.315

And the label of the system partition on "usbimage" is "Tails" 0.169

And the system partition on "usbimage" is an EFI system partition 0.136

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.119

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.074

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.073

And the system partition on "usbimage" has the expected flags 0.107

Hooks

After features/support/hooks.rb:291 1.221

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:20.431	Passed

Feature Report