Cucumber Reports (no 25) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_20268-more-early-patch-functionality	25	30 Mar 2024, 06:43

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:26.373	Passed

Tags: @product @not_release_blocker

25.099

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.255

And I temporarily create a 4 GiB disk named "gptfat" 0.061

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.082

And I plug USB drive "gptfat" 2.472

When I start Tails Installer 9.185

Then I am told by Tails Installer that the destination device "is too small" 0.041

Hooks

After features/support/hooks.rb:291 0.708

After features/support/hooks.rb:75 0.001

Tags: @product

19.949

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.126

And I temporarily create a 7200 MiB disk named "temp" 0.055

And I start Tails Installer 8.845

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.569

Then the "temp" USB drive is selected 0.104

When I unplug USB drive "temp" 0.204

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 0.692

After features/support/hooks.rb:75 0.000

Tags: @product

3:42.318

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.919

And I temporarily create a 7200 MiB disk named "install" 0.061

And I create a gpt partition with a vfat filesystem on disk "install" 5.120

And I plug USB drive "install" 2.520

And I install Tails to USB drive "install" by cloning 3:14.541

Then the running Tails is installed on USB drive "install" 11.086

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.144

After features/support/hooks.rb:75 0.112

Tags: @product

3:38.192

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.152

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.741

And I install Tails to USB drive "install" by cloning 3:15.518

Then the running Tails is installed on USB drive "install" 11.664

But there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.333

After features/support/hooks.rb:75 0.117

Tags: @product

4:16.728

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.333

And I create a file in the Persistent directory 0.102

And I temporarily create a 7200 MiB disk named "install" 0.060

And I create a gpt partition with a vfat filesystem on disk "install" 4.259

And I plug USB drive "install" 2.459

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.084

Then the running Tails is installed on USB drive "install" 12.111

And there is a persistence partition on USB drive "install" 0.072

And the USB drive "install" contains the same files as my persistent storage 3.244

Hooks

After features/support/hooks.rb:291 2.051

After features/support/hooks.rb:75 0.126

Tags: @product

3:44.447

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.093

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.588

And I install Tails to USB drive "install" by cloning 3:17.201

Then the running Tails is installed on USB drive "install" 13.454

And there is no persistence partition on USB drive "install" 0.058

Hooks

After features/support/hooks.rb:291 1.550

After features/support/hooks.rb:75 0.090

Tags: @product

3:57.677

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.490

And I have started Tails from DVD without network and logged in 8.717

And I clone USB drive "__internal" to a temporary USB drive "install" 1.158

And I plug USB drive "install" 2.503

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:20.139

Then the running Tails is installed on USB drive "install" 15.585

And there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 1.450

After features/support/hooks.rb:75 0.102

Tags: @product @uefi

1:37.452

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.346

And I power off the computer 0.329

And the computer is set to boot in UEFI mode 0.031

When I start Tails from USB drive "__internal" with network unplugged and I login 1:22.709

Then Tails is running from USB drive "__internal" 0.291

And the boot device has safe access rights 2.702

And Tails has started in UEFI mode 0.041

Hooks

After features/support/hooks.rb:291 1.291

After features/support/hooks.rb:75 0.023

Tags: @product

1:22.575

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.311

And I plug and mount a USB drive containing a Tails USB image 29.565

And I create a 7200 MiB disk named "usbimage" 0.039

And I plug USB drive "usbimage" 2.398

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 42.259

Hooks

After features/support/hooks.rb:291 1.676

After features/support/hooks.rb:75 0.088

Tags: @product

1:21.931

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.188

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:20.691

Then Tails is running from USB drive "usbimage" 0.298

And the label of the system partition on "usbimage" is "Tails" 0.192

And the system partition on "usbimage" is an EFI system partition 0.146

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.145

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.071

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.121

And the system partition on "usbimage" has the expected flags 0.075

Hooks

After features/support/hooks.rb:291 1.034

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:26.373	Passed

Feature Report