Cucumber Reports (no 3) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_20268-more-early-patch-functionality	3	17 Mar 2024, 06:10

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:28.827	Passed

Tags: @product @not_release_blocker

33.656

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.958

And I temporarily create a 4 GiB disk named "gptfat" 0.048

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.934

And I plug USB drive "gptfat" 2.446

When I start Tails Installer 19.229

Then I am told by Tails Installer that the destination device "is too small" 0.038

Hooks

After features/support/hooks.rb:291 0.948

After features/support/hooks.rb:75 0.001

Tags: @product

28.571

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.874

And I temporarily create a 7200 MiB disk named "temp" 0.047

And I start Tails Installer 17.679

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.661

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.191

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 0.768

After features/support/hooks.rb:75 0.000

Tags: @product

3:51.521

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.885

And I temporarily create a 7200 MiB disk named "install" 0.041

And I create a gpt partition with a vfat filesystem on disk "install" 4.142

And I plug USB drive "install" 2.471

And I install Tails to USB drive "install" by cloning 3:27.081

Then the running Tails is installed on USB drive "install" 9.838

But there is no persistence partition on USB drive "install" 0.059

Hooks

After features/support/hooks.rb:291 1.300

After features/support/hooks.rb:75 0.106

Tags: @product

3:47.166

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.047

And I temporarily create a 7200 MiB disk named "install" 0.032

And I plug USB drive "install" 2.416

And I install Tails to USB drive "install" by cloning 3:26.960

Then the running Tails is installed on USB drive "install" 9.651

But there is no persistence partition on USB drive "install" 0.057

Hooks

After features/support/hooks.rb:291 1.002

After features/support/hooks.rb:75 0.108

Tags: @product

4:23.781

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.976

And I create a file in the Persistent directory 0.065

And I temporarily create a 7200 MiB disk named "install" 0.074

And I create a gpt partition with a vfat filesystem on disk "install" 4.001

And I plug USB drive "install" 2.428

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:50.249

Then the running Tails is installed on USB drive "install" 12.731

And there is a persistence partition on USB drive "install" 0.076

And the USB drive "install" contains the same files as my persistent storage 3.177

Hooks

After features/support/hooks.rb:291 1.666

After features/support/hooks.rb:75 0.135

Tags: @product

3:55.136

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.259

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.446

And I install Tails to USB drive "install" by cloning 3:27.603

Then the running Tails is installed on USB drive "install" 13.725

And there is no persistence partition on USB drive "install" 0.056

Hooks

After features/support/hooks.rb:291 1.569

After features/support/hooks.rb:75 0.098

Tags: @product

3:58.991

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.341

And I have started Tails from DVD without network and logged in 8.342

And I clone USB drive "__internal" to a temporary USB drive "install" 1.084

And I plug USB drive "install" 2.479

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:25.543

Then the running Tails is installed on USB drive "install" 12.140

And there is no persistence partition on USB drive "install" 0.059

Hooks

After features/support/hooks.rb:291 1.133

After features/support/hooks.rb:75 0.092

Tags: @product @uefi

1:43.841

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.432

And I power off the computer 0.319

And the computer is set to boot in UEFI mode 0.022

When I start Tails from USB drive "__internal" with network unplugged and I login 1:30.010

Then Tails is running from USB drive "__internal" 0.314

And the boot device has safe access rights 2.689

And Tails has started in UEFI mode 0.052

Hooks

After features/support/hooks.rb:291 0.909

After features/support/hooks.rb:75 0.028

Tags: @product

1:28.359

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.007

And I plug and mount a USB drive containing a Tails USB image 27.230

And I create a 7200 MiB disk named "usbimage" 0.038

And I plug USB drive "usbimage" 2.399

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 50.684

Hooks

After features/support/hooks.rb:291 1.673

After features/support/hooks.rb:75 0.085

Tags: @product

1:17.801

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.133

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:16.661

Then Tails is running from USB drive "usbimage" 0.309

And the label of the system partition on "usbimage" is "Tails" 0.173

And the system partition on "usbimage" is an EFI system partition 0.135

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.142

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.086

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.076

And the system partition on "usbimage" has the expected flags 0.081

Hooks

After features/support/hooks.rb:291 0.614

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:28.827	Passed

Feature Report