Cucumber Reports (no 68) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_20268-more-early-patch-functionality	68	08 May 2024, 07:11

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:49.656	Passed

Tags: @product @not_release_blocker

26.130

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.695

And I temporarily create a 4 GiB disk named "gptfat" 0.060

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.275

And I plug USB drive "gptfat" 2.514

When I start Tails Installer 8.519

Then I am told by Tails Installer that the destination device "is too small" 0.065

Hooks

After features/support/hooks.rb:305 0.905

After features/support/hooks.rb:89 0.001

Tags: @product

20.072

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.252

And I temporarily create a 7200 MiB disk named "temp" 0.085

And I start Tails Installer 8.615

But a suitable USB device is not found 0.034

When I plug USB drive "temp" 2.707

Then the "temp" USB drive is selected 0.121

When I unplug USB drive "temp" 0.232

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:305 2.285

After features/support/hooks.rb:89 0.000

Tags: @product

4:8.494

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.258

And I temporarily create a 7200 MiB disk named "install" 0.117

And I create a gpt partition with a vfat filesystem on disk "install" 6.797

And I plug USB drive "install" 2.654

And I install Tails to USB drive "install" by cloning 3:37.219

Then the running Tails is installed on USB drive "install" 12.369

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:305 1.404

After features/support/hooks.rb:89 0.127

Tags: @product

3:44.583

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given I have started Tails from DVD without network and logged in 10.575

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.489

And I install Tails to USB drive "install" by cloning 3:19.118

Then the running Tails is installed on USB drive "install" 12.280

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:305 1.185

After features/support/hooks.rb:89 0.137

Tags: @product

4:26.574

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 16.465

And I create a file in the Persistent directory 0.188

And I temporarily create a 7200 MiB disk named "install" 0.066

And I create a gpt partition with a vfat filesystem on disk "install" 6.703

And I plug USB drive "install" 2.494

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.287

Then the running Tails is installed on USB drive "install" 15.895

And there is a persistence partition on USB drive "install" 0.065

And the USB drive "install" contains the same files as my persistent storage 3.407

Hooks

After features/support/hooks.rb:305 3.378

After features/support/hooks.rb:89 0.134

Tags: @product

3:48.949

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.911

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.501

And I install Tails to USB drive "install" by cloning 3:18.682

Then the running Tails is installed on USB drive "install" 16.728

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:305 1.499

After features/support/hooks.rb:89 0.087

Tags: @product

3:50.216

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.804

And I have started Tails from DVD without network and logged in 8.816

And I clone USB drive "__internal" to a temporary USB drive "install" 1.185

And I plug USB drive "install" 2.501

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:15.312

Then the running Tails is installed on USB drive "install" 12.519

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:305 1.464

After features/support/hooks.rb:89 0.124

Tags: @product @uefi

1:59.833

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.679

And I power off the computer 0.346

And the computer is set to boot in UEFI mode 0.030

When I start Tails from USB drive "__internal" with network unplugged and I login 1:42.433

Then Tails is running from USB drive "__internal" 0.465

And the boot device has safe access rights 3.801

And Tails has started in UEFI mode 0.076

Hooks

After features/support/hooks.rb:305 1.141

After features/support/hooks.rb:89 0.005

Tags: @product

1:36.917

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.581

And I plug and mount a USB drive containing a Tails USB image 40.373

And I create a 7200 MiB disk named "usbimage" 0.061

And I plug USB drive "usbimage" 2.523

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 45.377

Hooks

After features/support/hooks.rb:305 2.759

After features/support/hooks.rb:89 0.093

Tags: @product

1:27.882

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.171

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:26.679

Then Tails is running from USB drive "usbimage" 0.289

And the label of the system partition on "usbimage" is "Tails" 0.244

And the system partition on "usbimage" is an EFI system partition 0.134

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.131

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.071

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.073

And the system partition on "usbimage" has the expected flags 0.087

Hooks

After features/support/hooks.rb:305 0.700

After features/support/hooks.rb:89 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:49.656	Passed

Feature Report