Cucumber Reports (no 8) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_20268-more-early-patch-functionality	8	19 Mar 2024, 17:27

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:40.482	Passed

Tags: @product @not_release_blocker

22.941

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.111

And I temporarily create a 4 GiB disk named "gptfat" 0.048

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.001

And I plug USB drive "gptfat" 2.546

When I start Tails Installer 8.175

Then I am told by Tails Installer that the destination device "is too small" 0.058

Hooks

After features/support/hooks.rb:291 0.742

After features/support/hooks.rb:75 0.001

Tags: @product

18.894

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.207

And I temporarily create a 7200 MiB disk named "temp" 0.030

And I start Tails Installer 7.923

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.427

Then the "temp" USB drive is selected 0.072

When I unplug USB drive "temp" 0.193

Then a suitable USB device is not found 0.019

Hooks

After features/support/hooks.rb:291 0.725

After features/support/hooks.rb:75 0.000

Tags: @product

3:43.660

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.955

And I temporarily create a 7200 MiB disk named "install" 0.034

And I create a gpt partition with a vfat filesystem on disk "install" 5.053

And I plug USB drive "install" 2.503

And I install Tails to USB drive "install" by cloning 3:17.915

Then the running Tails is installed on USB drive "install" 10.126

But there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:291 1.364

After features/support/hooks.rb:75 0.110

Tags: @product

3:37.950

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.302

And I temporarily create a 7200 MiB disk named "install" 0.041

And I plug USB drive "install" 2.471

And I install Tails to USB drive "install" by cloning 3:16.703

Then the running Tails is installed on USB drive "install" 10.358

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.152

After features/support/hooks.rb:75 0.109

Tags: @product

4:15.737

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.130

And I create a file in the Persistent directory 0.063

And I temporarily create a 7200 MiB disk named "install" 0.035

And I create a gpt partition with a vfat filesystem on disk "install" 4.163

And I plug USB drive "install" 2.471

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:39.889

Then the running Tails is installed on USB drive "install" 13.676

And there is a persistence partition on USB drive "install" 0.066

And the USB drive "install" contains the same files as my persistent storage 3.239

Hooks

After features/support/hooks.rb:291 2.116

After features/support/hooks.rb:75 0.121

Tags: @product

3:49.692

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.046

And I temporarily create a 7200 MiB disk named "install" 0.028

And I plug USB drive "install" 2.557

And I install Tails to USB drive "install" by cloning 3:19.235

Then the running Tails is installed on USB drive "install" 16.766

And there is no persistence partition on USB drive "install" 0.057

Hooks

After features/support/hooks.rb:291 1.555

After features/support/hooks.rb:75 0.122

Tags: @product

3:51.138

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.949

And I have started Tails from DVD without network and logged in 8.567

And I clone USB drive "__internal" to a temporary USB drive "install" 1.213

And I plug USB drive "install" 2.484

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:17.395

Then the running Tails is installed on USB drive "install" 11.456

And there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:291 1.355

After features/support/hooks.rb:75 0.103

Tags: @product @uefi

1:44.625

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.412

And I power off the computer 0.326

And the computer is set to boot in UEFI mode 0.022

When I start Tails from USB drive "__internal" with network unplugged and I login 1:30.589

Then Tails is running from USB drive "__internal" 0.300

And the boot device has safe access rights 2.918

And Tails has started in UEFI mode 0.055

Hooks

After features/support/hooks.rb:291 0.635

After features/support/hooks.rb:75 0.006

Tags: @product

1:35.972

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.168

And I plug and mount a USB drive containing a Tails USB image 30.193

And I create a 7200 MiB disk named "usbimage" 0.116

And I plug USB drive "usbimage" 2.436

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 55.058

Hooks

After features/support/hooks.rb:291 1.922

After features/support/hooks.rb:75 0.087

Tags: @product

1:19.868

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.132

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.549

Then Tails is running from USB drive "usbimage" 0.376

And the label of the system partition on "usbimage" is "Tails" 0.170

And the system partition on "usbimage" is an EFI system partition 0.142

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.157

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.137

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.081

And the system partition on "usbimage" has the expected flags 0.121

Hooks

After features/support/hooks.rb:291 0.633

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:40.482	Passed

Feature Report