Cucumber Reports (no 9) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_20268-more-early-patch-functionality	9	19 Mar 2024, 23:03

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	23:48.820	Passed

Tags: @product @not_release_blocker

22.669

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.952

And I temporarily create a 4 GiB disk named "gptfat" 0.055

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.090

And I plug USB drive "gptfat" 2.501

When I start Tails Installer 8.028

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:291 1.843

After features/support/hooks.rb:75 0.001

Tags: @product

18.676

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.877

And I temporarily create a 7200 MiB disk named "temp" 0.041

And I start Tails Installer 7.991

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.469

Then the "temp" USB drive is selected 0.079

When I unplug USB drive "temp" 0.178

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 1.633

After features/support/hooks.rb:75 0.000

Tags: @product

3:39.786

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.958

And I temporarily create a 7200 MiB disk named "install" 0.049

And I create a gpt partition with a vfat filesystem on disk "install" 4.141

And I plug USB drive "install" 2.470

And I install Tails to USB drive "install" by cloning 3:15.041

Then the running Tails is installed on USB drive "install" 10.063

But there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.237

After features/support/hooks.rb:75 0.111

Tags: @product

3:38.118

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.073

And I temporarily create a 7200 MiB disk named "install" 0.063

And I plug USB drive "install" 2.447

And I install Tails to USB drive "install" by cloning 3:17.127

Then the running Tails is installed on USB drive "install" 10.347

But there is no persistence partition on USB drive "install" 0.059

Hooks

After features/support/hooks.rb:291 1.237

After features/support/hooks.rb:75 0.110

Tags: @product

4:2.868

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.442

And I create a file in the Persistent directory 0.180

And I temporarily create a 7200 MiB disk named "install" 0.057

And I create a gpt partition with a vfat filesystem on disk "install" 4.162

And I plug USB drive "install" 2.531

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:28.175

Then the running Tails is installed on USB drive "install" 12.893

And there is a persistence partition on USB drive "install" 0.063

And the USB drive "install" contains the same files as my persistent storage 3.362

Hooks

After features/support/hooks.rb:291 1.971

After features/support/hooks.rb:75 0.119

Tags: @product

3:43.072

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.660

And I temporarily create a 7200 MiB disk named "install" 0.054

And I plug USB drive "install" 2.538

And I install Tails to USB drive "install" by cloning 3:17.527

Then the running Tails is installed on USB drive "install" 12.236

And there is no persistence partition on USB drive "install" 0.055

Hooks

After features/support/hooks.rb:291 1.379

After features/support/hooks.rb:75 0.099

Tags: @product

3:50.639

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.018

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 8.955

And I have started Tails from DVD without network and logged in 8.371

And I clone USB drive "__internal" to a temporary USB drive "install" 1.062

And I plug USB drive "install" 2.588

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:17.708

Then the running Tails is installed on USB drive "install" 11.872

And there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:291 1.181

After features/support/hooks.rb:75 0.089

Tags: @product @uefi

1:37.490

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.467

And I power off the computer 0.318

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:22.429

Then Tails is running from USB drive "__internal" 0.332

And the boot device has safe access rights 2.872

And Tails has started in UEFI mode 0.045

Hooks

After features/support/hooks.rb:291 0.560

After features/support/hooks.rb:75 0.005

Tags: @product

1:18.385

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.093

And I plug and mount a USB drive containing a Tails USB image 27.131

And I create a 7200 MiB disk named "usbimage" 0.054

And I plug USB drive "usbimage" 2.403

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 40.703

Hooks

After features/support/hooks.rb:291 1.733

After features/support/hooks.rb:75 0.086

Tags: @product

1:17.112

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.171

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:15.820

Then Tails is running from USB drive "usbimage" 0.317

And the label of the system partition on "usbimage" is "Tails" 0.186

And the system partition on "usbimage" is an EFI system partition 0.163

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.133

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.088

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.148

And the system partition on "usbimage" has the expected flags 0.081

Hooks

After features/support/hooks.rb:291 0.636

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	23:48.820	Passed

Feature Report