And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:56.296
And
I configure APT to prefer an old version of cowsay
0.036
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.763
And
I accept adding "cowsay" to Additional Software
6.920
And
Additional Software is correctly configured for package "cowsay"
1.069
And
I shutdown Tails and wait for the computer to power off
6.530
And
I start Tails from USB drive "__internal" with network unplugged
1:3.069
And
I enable persistence
11.802
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
43.451
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.764
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.076
And
available upgrades have been checked
2.254
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.187
And
I can open the Additional Software configuration window from the notification
2.635
And
I shutdown Tails and wait for the computer to power off
2:8.626
And
I start Tails from USB drive "__internal" with network unplugged
1:10.783
And
I enable persistence
12.425
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
39.184
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.620
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.132
And
the network is plugged
0.284
Then
the Additional Software upgrade service has started
0.178
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100