And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.333
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.070
And
I accept adding "cowsay" to Additional Software
5.620
And
Additional Software is correctly configured for package "cowsay"
0.901
And
I shutdown Tails and wait for the computer to power off
6.332
And
I start Tails from USB drive "__internal" with network unplugged
1:1.854
And
I enable persistence
13.055
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
44.036
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.509
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.078
And
available upgrades have been checked
0.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.980
And
I can open the Additional Software configuration window from the notification
2.698
And
I shutdown Tails and wait for the computer to power off
2:2.648
And
I start Tails from USB drive "__internal" with network unplugged
1:9.131
And
I enable persistence
12.287
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
46.155
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.301
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107