Project Number Date
test_Tails_ISO_20297-debug-proxy-refusing-connections 57 10 May 2025, 18:35

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 75 0 0 0 0 75 10 0 10 20:23.325 Passed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
26.420
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.002
Given I have started Tails from DVD without network and logged in 8.637
And I temporarily create a 4 GiB disk named "gptfat" 0.048
And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.309
And I plug USB drive "gptfat" 2.416
When I start Tails Installer 8.951
Then I am told by Tails Installer that the destination device "is too small" 0.056
After features/support/hooks.rb:335 0.681
After features/support/hooks.rb:105 0.000
Tags: @product
21.129
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.002
Given I have started Tails from DVD without network and logged in 8.366
And I temporarily create a 7200 MiB disk named "temp" 0.046
And I start Tails Installer 9.699
But a suitable USB device is not found 0.021
When I plug USB drive "temp" 2.662
Then the "temp" USB drive is selected 0.105
When I unplug USB drive "temp" 0.205
Then a suitable USB device is not found 0.022
After features/support/hooks.rb:335 0.765
After features/support/hooks.rb:105 0.000
Tags: @product
2:34.354
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.002
Given I have started Tails from DVD without network and logged in 8.497
And I temporarily create a 7200 MiB disk named "install" 0.045
And I create a gpt partition with a vfat filesystem on disk "install" 6.405
And I plug USB drive "install" 2.372
And I install Tails to USB drive "install" by cloning 1:56.092
Then the running Tails is installed on USB drive "install" 14.944
And there is a random seed on USB drive "install" 5.927
But there is no persistence partition on USB drive "install" 0.069
After features/support/hooks.rb:335 1.807
After features/support/hooks.rb:105 0.123
Tags: @product
2:28.995
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.002
Given I have started Tails from DVD without network and logged in 8.136
And I temporarily create a 7200 MiB disk named "install" 0.076
And I plug USB drive "install" 2.466
And I install Tails to USB drive "install" by cloning 1:57.451
Then the running Tails is installed on USB drive "install" 14.801
And there is a random seed on USB drive "install" 5.999
But there is no persistence partition on USB drive "install" 0.063
After features/support/hooks.rb:335 2.304
After features/support/hooks.rb:105 0.134
Tags: @product
3:19.054
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.002
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.065
And I create a file in the Persistent directory 0.071
And I temporarily create a 7200 MiB disk named "install" 0.066
And I create a gpt partition with a vfat filesystem on disk "install" 6.375
And I plug USB drive "install" 2.496
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:20.680
Then the running Tails is installed on USB drive "install" 21.458
And there is a random seed on USB drive "install" 6.091
And there is a persistence partition on USB drive "install" 0.086
And the USB drive "install" contains the same files as my persistent storage 7.662
After features/support/hooks.rb:335 3.218
After features/support/hooks.rb:105 0.134
Tags: @product
2:43.124
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.374
And I temporarily create a 7200 MiB disk named "install" 0.055
And I plug USB drive "install" 2.539
And I install Tails to USB drive "install" by cloning 1:58.426
Then the running Tails is installed on USB drive "install" 22.608
And there is a random seed on USB drive "install" 6.038
And there is no persistence partition on USB drive "install" 0.082
After features/support/hooks.rb:335 2.491
After features/support/hooks.rb:105 0.091
Tags: @product
2:44.407
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.003
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.084
And I have started Tails from DVD without network and logged in 8.686
And I clone USB drive "__internal" to a temporary USB drive "install" 1.333
And I plug USB drive "install" 3.550
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 1:54.291
Then the running Tails is installed on USB drive "install" 20.323
And there is a random seed on USB drive "install" 6.066
And there is no persistence partition on USB drive "install" 0.070
After features/support/hooks.rb:335 1.912
After features/support/hooks.rb:105 0.113
Tags: @product @uefi
2:4.087
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.011
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.950
And I power off the computer 0.330
And the computer is set to boot in UEFI mode 0.054
When I start Tails from USB drive "__internal" with network unplugged and I login 1:46.908
Then Tails is running from USB drive "__internal" 0.354
And the boot device has safe access rights 3.409
And Tails has started in UEFI mode 0.080
After features/support/hooks.rb:335 1.094
After features/support/hooks.rb:105 0.007
Tags: @product
1:59.210
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.002
Given I have started Tails from DVD without network and logged in 8.607
And I plug and mount a USB drive containing a Tails USB image 44.090
And I create a 7200 MiB disk named "usbimage" 0.047
And I plug USB drive "usbimage" 2.402
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:4.061
After features/support/hooks.rb:335 3.570
After features/support/hooks.rb:105 0.102
Tags: @product
1:42.541
Before features/support/hooks.rb:271 0.000
Before features/support/hooks.rb:278 0.002
Given a computer 0.291
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:40.790
Then Tails is running from USB drive "usbimage" 0.407
And the label of the system partition on "usbimage" is "Tails" 0.314
And the system partition on "usbimage" is an EFI system partition 0.281
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.185
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.086
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.089
And the system partition on "usbimage" has the expected flags 0.094
After features/support/hooks.rb:335 0.744
After features/support/hooks.rb:105 0.006