And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.019
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.106
And
I accept adding "cowsay" to Additional Software
5.559
And
Additional Software is correctly configured for package "cowsay"
0.897
And
I shutdown Tails and wait for the computer to power off
6.465
And
I start Tails from USB drive "__internal" with network unplugged
59.007
And
I enable persistence
12.480
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
42.554
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.081
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.458
And
I can open the Additional Software configuration window from the notification
2.382
And
I shutdown Tails and wait for the computer to power off
2:2.698
And
I start Tails from USB drive "__internal" with network unplugged
58.654
And
I enable persistence
11.429
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
42.654
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.113
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090