And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.440
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.383
And
I accept adding "cowsay" to Additional Software
6.735
And
Additional Software is correctly configured for package "cowsay"
0.817
And
I shutdown Tails and wait for the computer to power off
6.357
And
I start Tails from USB drive "__internal" with network unplugged
59.298
And
I enable persistence
14.054
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
29.467
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.311
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.077
And
available upgrades have been checked
0.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.247
And
I can open the Additional Software configuration window from the notification
2.868
And
I shutdown Tails and wait for the computer to power off
18.002
And
I start Tails from USB drive "__internal" with network unplugged
1:0.476
And
I enable persistence
10.610
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
40.840
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.411
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.082
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079