And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:59.447
And
I configure APT to prefer an old version of cowsay
0.036
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.689
And
I accept adding "cowsay" to Additional Software
5.917
And
Additional Software is correctly configured for package "cowsay"
1.119
And
I shutdown Tails and wait for the computer to power off
6.627
And
I start Tails from USB drive "__internal" with network unplugged
1:4.103
And
I enable persistence
14.011
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
43.959
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.429
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.079
And
available upgrades have been checked
1.131
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.880
And
I can open the Additional Software configuration window from the notification
2.831
And
I shutdown Tails and wait for the computer to power off
2:3.020
And
I start Tails from USB drive "__internal" with network unplugged
1:5.133
And
I enable persistence
13.127
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
41.939
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.156
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.079
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076