Cucumber Reports (no 28) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_20522-ocr-more	28	06 Jan 2025, 05:06

	Steps	Scenarios	Features
Installing Tails to a USB drive	91	1	3	0	0	95	11	1	12	25:21.904	Failed

Tags: @product @not_release_blocker

26.098

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.350

And I temporarily create a 4 GiB disk named "gptfat" 0.049

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.218

And I plug USB drive "gptfat" 2.539

When I start Tails Installer 8.891

Then I am told by Tails Installer that the destination device "is too small" 0.049

Hooks

After features/support/hooks.rb:326 0.711

After features/support/hooks.rb:100 0.001

Tags: @product

19.801

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.535

And I temporarily create a 7200 MiB disk named "temp" 0.043

And I start Tails Installer 8.155

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.697

Then the "temp" USB drive is selected 0.134

When I unplug USB drive "temp" 0.194

Then a suitable USB device is not found 0.019

Hooks

After features/support/hooks.rb:326 0.688

After features/support/hooks.rb:100 0.000

Tags: @product

2:32.499

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.744

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 6.662

And I plug USB drive "install" 2.527

And I install Tails to USB drive "install" by cloning 1:54.451

Then the running Tails is installed on USB drive "install" 13.975

And there is a random seed on USB drive "install" 6.015

But there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:326 2.091

After features/support/hooks.rb:100 0.140

Tags: @product

2:26.465

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.353

And I temporarily create a 7200 MiB disk named "install" 0.081

And I plug USB drive "install" 3.856

And I install Tails to USB drive "install" by cloning 1:54.083

Then the running Tails is installed on USB drive "install" 13.967

And there is a random seed on USB drive "install" 6.043

But there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:326 1.769

After features/support/hooks.rb:100 0.126

Tags: @product

2:50.751

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.134

And I create a file in the Persistent directory 0.098

And I temporarily create a 7200 MiB disk named "install" 0.046

And I create a gpt partition with a vfat filesystem on disk "install" 6.426

And I plug USB drive "install" 2.436

And I install Tails with Persistent Storage to USB drive "install" by cloning 2:2.806

Then the running Tails is installed on USB drive "install" 16.765

And there is a random seed on USB drive "install" 6.086

And there is a persistence partition on USB drive "install" 0.092

And the USB drive "install" contains the same files as my persistent storage 2.857

Hooks

After features/support/hooks.rb:326 2.389

After features/support/hooks.rb:100 0.145

Tags: @product

2:36.093

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.850

And I temporarily create a 7200 MiB disk named "install" 0.076

And I plug USB drive "install" 2.752

And I install Tails to USB drive "install" by cloning 1:54.068

Then the running Tails is installed on USB drive "install" 20.925

And there is a random seed on USB drive "install" 6.345

And there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:326 2.744

After features/support/hooks.rb:100 0.102

Tags: @product

2:32.828

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:269 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.061

And I have started Tails from DVD without network and logged in 9.152

And I clone USB drive "__internal" to a temporary USB drive "install" 1.167

And I plug USB drive "install" 2.631

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 1:43.213

Then the running Tails is installed on USB drive "install" 18.496

And there is a random seed on USB drive "install" 6.039

And there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:326 1.797

After features/support/hooks.rb:100 0.092

Tags: @product @uefi

3:13.010

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:269 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.390

And I power off the computer 0.331

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 3:1.260

try_for()

try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuGRUB_Bullseye.png", "TailsBootMenuGRUB_Bookworm.png"] on the screen
./features/support/helpers/screen.rb:246:in `rescue in wait_any'
./features/support/helpers/screen.rb:230:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'

Then Tails is running from USB drive "__internal" 0.000

And the boot device has safe access rights 0.000

And Tails has started in UEFI mode 0.000

Hooks

After features/support/hooks.rb:326 10.567

Output 1

SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 00:58:15)

Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_20522-ocr-more/28/artifact/build-artifacts/00:58:15_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png

Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_20522-ocr-more/28/artifact/build-artifacts/00:58:15_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv

Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_20522-ocr-more/28/artifact/build-artifacts/00:58:15_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal

After features/support/hooks.rb:100 0.071

Tags: @product

1:52.133

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.235

And I plug and mount a USB drive containing a Tails USB image 43.800

And I create a 7200 MiB disk named "usbimage" 0.042

And I plug USB drive "usbimage" 2.382

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 57.672

Hooks

After features/support/hooks.rb:326 3.273

After features/support/hooks.rb:100 0.101

Tags: @product

1:35.520

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given a computer 0.201

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:34.016

Then Tails is running from USB drive "usbimage" 0.337

And the label of the system partition on "usbimage" is "Tails" 0.330

And the system partition on "usbimage" is an EFI system partition 0.205

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.147

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.082

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.094

And the system partition on "usbimage" has the expected flags 0.105

Hooks

After features/support/hooks.rb:326 0.618

After features/support/hooks.rb:100 0.043

Tags: @product

2:31.347

Scenario Error when the GPT backup header is corrupt

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given a computer 0.154

And I set Tails to boot with options "test_gpt_corruption=gpt_backup,gpt_backup_table" 0.000

And I create a 7200 MiB disk named "temp" 0.038

And I plug USB drive "temp" 1.042

And I write the Tails USB image to disk "temp" 28.649

And I start Tails from USB drive "temp" with network unplugged 1:32.498

Then Tails is running from USB drive "temp" 0.322

When I log in to a new session 21.009

And all notifications have disappeared 7.487

Then the system journal includes message "Detected partitioning-corruption, but not showing any message" 0.143

Hooks

After features/support/hooks.rb:326 0.664

After features/support/hooks.rb:100 0.005

Tags: @product

2:25.353

Scenario Error when the disk GUID has not changed

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given a computer 0.179

And I set Tails to boot with options "test_gpt_corruption=guid" 0.000

And I create a 7200 MiB disk named "temp" 0.322

And I plug USB drive "temp" 1.047

And I write the Tails USB image to disk "temp" 27.923

And I start Tails from USB drive "temp" with network unplugged 1:25.333

Then Tails is running from USB drive "temp" 0.484

When I log in to a new session 21.637

And all notifications have disappeared 8.130

Then I see an error about system partition resizing 0.295

Hooks

After features/support/hooks.rb:326 0.681

After features/support/hooks.rb:100 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	91	1	3	0	0	95	11	1	12	25:21.904	Failed

Feature Report