And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.555
And
I configure APT to prefer an old version of cowsay
0.038
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.360
And
I accept adding "cowsay" to Additional Software
6.421
And
Additional Software is correctly configured for package "cowsay"
1.101
And
I shutdown Tails and wait for the computer to power off
6.199
And
I start Tails from USB drive "__internal" with network unplugged
1:1.255
And
I enable persistence
15.622
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
48.137
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.984
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.082
And
available upgrades have been checked
2.930
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.981
And
I can open the Additional Software configuration window from the notification
3.777
And
I shutdown Tails and wait for the computer to power off
2:2.174
And
I start Tails from USB drive "__internal" with network unplugged
1:3.603
And
I enable persistence
13.582
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.318
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.719
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.522
Then
the Additional Software upgrade service has started
0.204
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093