And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.314
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.225
And
I accept adding "cowsay" to Additional Software
6.668
And
Additional Software is correctly configured for package "cowsay"
0.926
And
I shutdown Tails and wait for the computer to power off
6.228
And
I start Tails from USB drive "__internal" with network unplugged
1:2.058
And
I enable persistence
13.102
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
44.891
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.052
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.077
And
available upgrades have been checked
0.139
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.528
And
I can open the Additional Software configuration window from the notification
2.508
And
I shutdown Tails and wait for the computer to power off
2:3.908
And
I start Tails from USB drive "__internal" with network unplugged
1:6.614
And
I enable persistence
13.977
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
39.519
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.317
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097