And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.912
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.780
And
I accept adding "cowsay" to Additional Software
6.940
And
Additional Software is correctly configured for package "cowsay"
0.911
And
I shutdown Tails and wait for the computer to power off
6.560
And
I start Tails from USB drive "__internal" with network unplugged
1:0.049
And
I enable persistence
13.538
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
38.679
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.887
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.075
And
available upgrades have been checked
1.252
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.645
And
I can open the Additional Software configuration window from the notification
3.266
And
I shutdown Tails and wait for the computer to power off
2:2.723
And
I start Tails from USB drive "__internal" with network unplugged
59.964
And
I enable persistence
11.975
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
39.993
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.025
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098