And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.990
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.275
And
I accept adding "cowsay" to Additional Software
4.252
And
Additional Software is correctly configured for package "cowsay"
0.971
And
I shutdown Tails and wait for the computer to power off
6.613
And
I start Tails from USB drive "__internal" with network unplugged
1:2.601
And
I enable persistence
16.155
And
I configure APT to prefer an old version of cowsay
0.050
And
I disable the tails-virt-notify-user.service user unit
0.108
And
I log in to a new session
43.340
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.504
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.095
And
the network is plugged
0.096
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.098
And
I can open the Additional Software configuration window from the notification
2.604
And
I shutdown Tails and wait for the computer to power off
2:8.020
And
I start Tails from USB drive "__internal" with network unplugged
59.086
And
I enable persistence
14.154
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
39.635
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.418
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088