And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.119
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.717
And
I accept adding "cowsay" to Additional Software
6.884
And
Additional Software is correctly configured for package "cowsay"
1.347
And
I shutdown Tails and wait for the computer to power off
4.834
And
I start Tails from USB drive "__internal" with network unplugged
1:3.317
And
I enable persistence
14.892
And
I configure APT to prefer an old version of cowsay
0.055
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
46.047
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.871
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.071
And
available upgrades have been checked
0.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.244
And
I can open the Additional Software configuration window from the notification
3.608
And
I shutdown Tails and wait for the computer to power off
2:8.050
And
I start Tails from USB drive "__internal" with network unplugged
1:1.822
And
I enable persistence
14.581
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
42.910
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.470
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092