And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.026
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.137
And
I accept adding "cowsay" to Additional Software
6.803
And
Additional Software is correctly configured for package "cowsay"
1.041
And
I shutdown Tails and wait for the computer to power off
6.820
And
I start Tails from USB drive "__internal" with network unplugged
1:0.608
And
I enable persistence
12.019
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
42.103
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.088
And
the network is plugged
0.075
And
available upgrades have been checked
0.247
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.555
And
I can open the Additional Software configuration window from the notification
2.808
And
I shutdown Tails and wait for the computer to power off
13.127
And
I start Tails from USB drive "__internal" with network unplugged
1:2.371
And
I enable persistence
14.967
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
44.408
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.437
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096