And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.322
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.203
And
I accept adding "cowsay" to Additional Software
5.533
And
Additional Software is correctly configured for package "cowsay"
0.841
And
I shutdown Tails and wait for the computer to power off
4.504
And
I start Tails from USB drive "__internal" with network unplugged
58.641
And
I enable persistence
12.726
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
40.078
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.398
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.068
And
available upgrades have been checked
0.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.427
And
I can open the Additional Software configuration window from the notification
3.108
And
I shutdown Tails and wait for the computer to power off
2:3.098
And
I start Tails from USB drive "__internal" with network unplugged
1:0.848
And
I enable persistence
13.773
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
46.487
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.934
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.230
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102