And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.344
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.660
And
I accept adding "cowsay" to Additional Software
4.976
And
Additional Software is correctly configured for package "cowsay"
1.012
And
I shutdown Tails and wait for the computer to power off
6.328
And
I start Tails from USB drive "__internal" with network unplugged
1:3.036
And
I enable persistence
12.113
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
39.908
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.084
And
available upgrades have been checked
0.074
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.755
And
I can open the Additional Software configuration window from the notification
3.645
And
I shutdown Tails and wait for the computer to power off
17.925
And
I start Tails from USB drive "__internal" with network unplugged
1:3.205
And
I enable persistence
14.630
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.442
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.351
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.201
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089