And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.917
And
I configure APT to prefer an old version of cowsay
0.038
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.960
And
I accept adding "cowsay" to Additional Software
4.662
And
Additional Software is correctly configured for package "cowsay"
1.024
And
I shutdown Tails and wait for the computer to power off
4.936
And
I start Tails from USB drive "__internal" with network unplugged
1:9.744
And
I enable persistence
12.029
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
42.827
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.544
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.090
And
available upgrades have been checked
0.116
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.346
And
I can open the Additional Software configuration window from the notification
3.032
And
I shutdown Tails and wait for the computer to power off
8.960
And
I start Tails from USB drive "__internal" with network unplugged
1:2.015
And
I enable persistence
12.621
And
I configure APT to prefer an old version of cowsay
0.082
And
I log in to a new session
40.272
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.604
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.765
Then
the Additional Software upgrade service has started
0.203
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108