And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.642
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.342
And
I accept adding "cowsay" to Additional Software
4.682
And
Additional Software is correctly configured for package "cowsay"
1.057
And
I shutdown Tails and wait for the computer to power off
6.534
And
I start Tails from USB drive "__internal" with network unplugged
1:6.425
And
I enable persistence
14.049
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
41.312
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.444
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.074
And
available upgrades have been checked
1.223
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.217
And
I can open the Additional Software configuration window from the notification
3.378
And
I shutdown Tails and wait for the computer to power off
2:4.500
And
I start Tails from USB drive "__internal" with network unplugged
58.600
And
I enable persistence
13.299
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
42.567
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087