And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.715
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.384
And
I accept adding "cowsay" to Additional Software
6.756
And
Additional Software is correctly configured for package "cowsay"
1.744
And
I shutdown Tails and wait for the computer to power off
6.690
And
I start Tails from USB drive "__internal" with network unplugged
1:8.148
And
I enable persistence
11.222
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
38.921
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.399
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.075
And
available upgrades have been checked
1.143
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.308
And
I can open the Additional Software configuration window from the notification
3.944
And
I shutdown Tails and wait for the computer to power off
6.413
And
I start Tails from USB drive "__internal" with network unplugged
57.899
And
I enable persistence
11.994
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.385
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.942
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104