And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.241
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.018
And
I accept adding "cowsay" to Additional Software
6.674
And
Additional Software is correctly configured for package "cowsay"
0.915
And
I shutdown Tails and wait for the computer to power off
6.421
And
I start Tails from USB drive "__internal" with network unplugged
58.589
And
I enable persistence
12.844
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
44.247
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.003
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.096
And
available upgrades have been checked
1.258
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.339
And
I can open the Additional Software configuration window from the notification
2.605
And
I shutdown Tails and wait for the computer to power off
2:2.253
And
I start Tails from USB drive "__internal" with network unplugged
58.424
And
I enable persistence
11.875
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
37.603
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.389
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.141
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095