And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.578
And
I configure APT to prefer an old version of cowsay
0.039
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.863
And
I accept adding "cowsay" to Additional Software
4.581
And
Additional Software is correctly configured for package "cowsay"
1.071
And
I shutdown Tails and wait for the computer to power off
4.862
And
I start Tails from USB drive "__internal" with network unplugged
1:3.959
And
I enable persistence
15.167
And
I configure APT to prefer an old version of cowsay
0.040
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
47.444
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.343
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.101
And
available upgrades have been checked
0.074
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.292
And
I can open the Additional Software configuration window from the notification
2.613
And
I shutdown Tails and wait for the computer to power off
17.009
And
I start Tails from USB drive "__internal" with network unplugged
1:0.609
And
I enable persistence
15.174
And
I configure APT to prefer an old version of cowsay
0.045
And
I log in to a new session
40.038
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.438
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094