And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.180
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.843
And
I accept adding "cowsay" to Additional Software
4.651
And
Additional Software is correctly configured for package "cowsay"
0.953
And
I shutdown Tails and wait for the computer to power off
6.882
And
I start Tails from USB drive "__internal" with network unplugged
1:1.171
And
I enable persistence
13.320
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
46.633
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.064
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.413
And
I can open the Additional Software configuration window from the notification
3.146
And
I shutdown Tails and wait for the computer to power off
2:3.536
And
I start Tails from USB drive "__internal" with network unplugged
1:3.754
And
I enable persistence
14.473
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
42.516
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.824
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.082
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091