And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.252
And
I configure APT to prefer an old version of cowsay
0.059
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.617
And
I accept adding "cowsay" to Additional Software
5.765
And
Additional Software is correctly configured for package "cowsay"
0.895
And
I shutdown Tails and wait for the computer to power off
4.441
And
I start Tails from USB drive "__internal" with network unplugged
59.676
And
I enable persistence
13.132
And
I configure APT to prefer an old version of cowsay
0.039
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
39.095
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.848
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.074
And
available upgrades have been checked
0.134
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.987
And
I can open the Additional Software configuration window from the notification
3.873
And
I shutdown Tails and wait for the computer to power off
2:7.707
And
I start Tails from USB drive "__internal" with network unplugged
58.667
And
I enable persistence
12.112
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
38.894
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.445
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103