And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.126
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.182
And
I accept adding "cowsay" to Additional Software
7.027
And
Additional Software is correctly configured for package "cowsay"
0.933
And
I shutdown Tails and wait for the computer to power off
6.527
And
I start Tails from USB drive "__internal" with network unplugged
58.555
And
I enable persistence
11.136
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
38.051
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.451
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.060
And
available upgrades have been checked
3.614
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.875
And
I can open the Additional Software configuration window from the notification
3.053
And
I shutdown Tails and wait for the computer to power off
14.671
And
I start Tails from USB drive "__internal" with network unplugged
59.461
And
I enable persistence
13.007
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
38.602
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.642
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.215
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107