And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:55.303
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.045
And
I accept adding "cowsay" to Additional Software
4.589
And
Additional Software is correctly configured for package "cowsay"
1.064
And
I shutdown Tails and wait for the computer to power off
6.457
And
I start Tails from USB drive "__internal" with network unplugged
1:1.368
And
I enable persistence
14.693
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.101
And
I log in to a new session
39.797
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.925
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.084
And
available upgrades have been checked
0.224
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.410
And
I can open the Additional Software configuration window from the notification
2.858
And
I shutdown Tails and wait for the computer to power off
2:3.999
And
I start Tails from USB drive "__internal" with network unplugged
1:0.678
And
I enable persistence
13.808
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
39.735
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.416
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.093
Then
the Additional Software upgrade service has started
0.265
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.123