And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:38.669
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.122
And
I accept adding "cowsay" to Additional Software
5.695
And
Additional Software is correctly configured for package "cowsay"
0.966
And
I shutdown Tails and wait for the computer to power off
6.764
And
I start Tails from USB drive "__internal" with network unplugged
1:2.963
And
I enable persistence
13.356
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
42.977
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.461
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.088
And
the network is plugged
0.093
And
available upgrades have been checked
0.123
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.853
And
I can open the Additional Software configuration window from the notification
4.072
And
I shutdown Tails and wait for the computer to power off
18.827
And
I start Tails from USB drive "__internal" with network unplugged
1:6.271
And
I enable persistence
16.194
And
I configure APT to prefer an old version of cowsay
0.039
And
I log in to a new session
45.174
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.672
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.153
Then
the Additional Software upgrade service has started
0.191
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091