And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:46.765
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.951
And
I accept adding "cowsay" to Additional Software
6.896
And
Additional Software is correctly configured for package "cowsay"
0.864
And
I shutdown Tails and wait for the computer to power off
4.382
And
I start Tails from USB drive "__internal" with network unplugged
59.415
And
I enable persistence
13.174
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
40.015
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.920
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.077
And
available upgrades have been checked
0.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.428
And
I can open the Additional Software configuration window from the notification
3.399
And
I shutdown Tails and wait for the computer to power off
2:3.231
And
I start Tails from USB drive "__internal" with network unplugged
57.897
And
I enable persistence
11.229
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.035
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.496
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.233
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095