And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.478
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.706
And
I accept adding "cowsay" to Additional Software
6.738
And
Additional Software is correctly configured for package "cowsay"
0.840
And
I shutdown Tails and wait for the computer to power off
6.297
And
I start Tails from USB drive "__internal" with network unplugged
57.786
And
I enable persistence
12.849
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
42.460
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.439
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.086
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.607
And
I can open the Additional Software configuration window from the notification
3.048
And
I shutdown Tails and wait for the computer to power off
6.659
And
I start Tails from USB drive "__internal" with network unplugged
58.640
And
I enable persistence
11.800
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.039
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.329
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085