And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.676
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.241
And
I accept adding "cowsay" to Additional Software
6.410
And
Additional Software is correctly configured for package "cowsay"
0.859
And
I shutdown Tails and wait for the computer to power off
6.283
And
I start Tails from USB drive "__internal" with network unplugged
57.787
And
I enable persistence
12.239
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
39.424
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.143
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.082
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.233
And
I can open the Additional Software configuration window from the notification
2.964
And
I shutdown Tails and wait for the computer to power off
13.325
And
I start Tails from USB drive "__internal" with network unplugged
59.515
And
I enable persistence
11.593
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
38.225
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.581
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.108
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081