And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.022
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.430
And
I accept adding "cowsay" to Additional Software
8.731
And
Additional Software is correctly configured for package "cowsay"
0.881
And
I shutdown Tails and wait for the computer to power off
6.266
And
I start Tails from USB drive "__internal" with network unplugged
57.246
And
I enable persistence
10.749
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
37.984
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.367
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.088
And
the network is plugged
0.074
And
available upgrades have been checked
2.281
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.417
And
I can open the Additional Software configuration window from the notification
2.872
And
I shutdown Tails and wait for the computer to power off
13.842
And
I start Tails from USB drive "__internal" with network unplugged
57.787
And
I enable persistence
12.850
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
38.691
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.613
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081