And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.709
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.588
And
I accept adding "cowsay" to Additional Software
6.447
And
Additional Software is correctly configured for package "cowsay"
0.826
And
I shutdown Tails and wait for the computer to power off
6.406
And
I start Tails from USB drive "__internal" with network unplugged
58.452
And
I enable persistence
12.276
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
36.408
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.678
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.069
And
available upgrades have been checked
0.170
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.968
And
I can open the Additional Software configuration window from the notification
3.631
And
I shutdown Tails and wait for the computer to power off
2:2.217
And
I start Tails from USB drive "__internal" with network unplugged
58.578
And
I enable persistence
13.820
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.666
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.051
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078