And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.512
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.556
And
I accept adding "cowsay" to Additional Software
6.581
And
Additional Software is correctly configured for package "cowsay"
0.892
And
I shutdown Tails and wait for the computer to power off
4.374
And
I start Tails from USB drive "__internal" with network unplugged
58.409
And
I enable persistence
14.475
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
41.045
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.863
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.086
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.007
And
I can open the Additional Software configuration window from the notification
3.512
And
I shutdown Tails and wait for the computer to power off
2:3.222
And
I start Tails from USB drive "__internal" with network unplugged
57.576
And
I enable persistence
12.575
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.744
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.771
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078