And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.433
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.957
And
I accept adding "cowsay" to Additional Software
5.768
And
Additional Software is correctly configured for package "cowsay"
1.122
And
I shutdown Tails and wait for the computer to power off
4.750
And
I start Tails from USB drive "__internal" with network unplugged
58.083
And
I enable persistence
13.762
And
I configure APT to prefer an old version of cowsay
0.047
And
I disable the tails-virt-notify-user.service user unit
0.110
And
I log in to a new session
40.349
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.752
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.089
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.716
And
I can open the Additional Software configuration window from the notification
3.636
And
I shutdown Tails and wait for the computer to power off
2:2.691
And
I start Tails from USB drive "__internal" with network unplugged
57.971
And
I enable persistence
13.227
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
40.240
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.375
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.151
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080