And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.382
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.328
And
I accept adding "cowsay" to Additional Software
3.812
And
Additional Software is correctly configured for package "cowsay"
0.986
And
I shutdown Tails and wait for the computer to power off
4.456
And
I start Tails from USB drive "__internal" with network unplugged
1:0.227
And
I enable persistence
13.643
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
42.414
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.322
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.064
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.358
And
I can open the Additional Software configuration window from the notification
3.138
And
I shutdown Tails and wait for the computer to power off
12.877
And
I start Tails from USB drive "__internal" with network unplugged
1:1.246
And
I enable persistence
12.079
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.726
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.120
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093