And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.172
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.815
And
I accept adding "cowsay" to Additional Software
6.644
And
Additional Software is correctly configured for package "cowsay"
0.914
And
I shutdown Tails and wait for the computer to power off
6.553
And
I start Tails from USB drive "__internal" with network unplugged
58.590
And
I enable persistence
13.925
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
38.035
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.633
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.069
And
available upgrades have been checked
1.121
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.861
And
I can open the Additional Software configuration window from the notification
3.230
And
I shutdown Tails and wait for the computer to power off
19.468
And
I start Tails from USB drive "__internal" with network unplugged
58.629
And
I enable persistence
13.428
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
44.896
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.591
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083