And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.211
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.853
And
I accept adding "cowsay" to Additional Software
5.114
And
Additional Software is correctly configured for package "cowsay"
0.974
And
I shutdown Tails and wait for the computer to power off
6.200
And
I start Tails from USB drive "__internal" with network unplugged
1:2.032
And
I enable persistence
14.192
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.147
And
I log in to a new session
38.054
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.813
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.089
And
available upgrades have been checked
0.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.183
And
I can open the Additional Software configuration window from the notification
3.412
And
I shutdown Tails and wait for the computer to power off
2:3.150
And
I start Tails from USB drive "__internal" with network unplugged
1:3.452
And
I enable persistence
14.082
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
40.986
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.526
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.084
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091