And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.520
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.983
And
I accept adding "cowsay" to Additional Software
7.218
And
Additional Software is correctly configured for package "cowsay"
0.881
And
I shutdown Tails and wait for the computer to power off
6.653
And
I start Tails from USB drive "__internal" with network unplugged
1:11.734
And
I enable persistence
14.539
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
44.329
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.958
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.075
And
available upgrades have been checked
1.309
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.901
And
I can open the Additional Software configuration window from the notification
2.925
And
I shutdown Tails and wait for the computer to power off
18.953
And
I start Tails from USB drive "__internal" with network unplugged
1:3.483
And
I enable persistence
13.782
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
38.995
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.414
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
the network is plugged
0.100
Then
the Additional Software upgrade service has started
0.211
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.147